Thread: Rover centre into P38 housing,does it fit?.

Originally Posted by PAT303

I've sent Dave Ashcroft a PM about this but want to know if anyone does know weather the rover centre with a spacer will bolt up to a P38 housing.My X-Tech is in the dealers for pick up next weekend and I was thinking the first mod I might do is rebuild a rover centre with Ashcrofts 3.50 H/D crown wheel and pinion and do away the the P38 centre which seems to be the biggest problem with the puma defender.Does anyone have any info on this. Thanks Pat

I'm not sure if the hemispheres are interchangale into the carriers, but I'm pretty sure the entire rover carrier (3rd member) fits into a P38 axle housing, but the P38 carrier does not drop into a Rover axle housing.

Interested in how you went finding out about this pat, i've been told the pinion is also shorter...

No go.I'm going to fit Ashcrofts HD internals instead. Pat

Hey Pat,

You have got my interest in this mod, it sound like a real good idea.

Are stock ratio's 4.11 : 1 ? and you are going to fit 3.50 : 1 ?

Do Ashcroft have the 4.11 ?

Will you fit Ashcroft lockers at the same time ?

What are Dave's thoughts on the additional strength this will provide ?

Sorry for all the questions.

Cheers
Grant

Im pretty sure stock ratios are still 3.54-1

yes stock ratios in the puma are 3.54, i think i will just do a salisbury conversion on the rear once i have run the car in for a while, sals housing d60 centre and 35 spline 1.5in diameter axles... that should hold up well

dont forget the ashcroft locker for the Sals....they need a push for this

Will be using a dAna 60 centre, hopefully by then I will be able to get an eaton e-locker, but would consider going with a Ashcroft if the made one to suit.... Main Ashcroft item I want is a underdrive unit for my county, just a little to costly for me and shipping would no doubt be a killer