Page 1 of 5 123 ... LastLast
Results 1 to 10 of 42

Thread: Suzie dies on the Stuart Hwy

  1. #1
    Join Date
    Mar 2011
    Location
    Sydney
    Posts
    335
    Total Downloaded
    0

    Suzie dies on the Stuart Hwy

    Today my 93 110 Suzie fell ill 32.8km out of Port Augusta on her way totheSimpson. Driving along and all of a sudden smoke bad smells and no drive. Ipulled over and by convoy suspected by transfer case. After Joining thenrma and towing her back totown I cracked open the transfer case and all seems well. I'm guessing clutch now. Any opinions on what to check for and anyone in town who'd let me pitch a tent on their lawn?

    Thanks guys
    Alex

  2. #2
    Join Date
    Nov 2009
    Location
    Ceduna, SA
    Posts
    254
    Total Downloaded
    0
    Oops... Have u more info... Is engine running okay.... Does it rev freely... Guessing a manual box.... Does the stick select gears freely....can u start it in gear and move off... Have u jacked up the corners and turned wheels to see what moves up the drive chain etc... James

  3. #3
    Join Date
    Sep 2007
    Location
    RIVERLAND, SOUTH AUSTRALIA
    Posts
    6,740
    Total Downloaded
    0
    port augusta I dont know but there are members in whyalla and over in wilmington and Im sure a few others about there I don't know of.

    Good luck with the car, hopefully next try it'll get you up past RANGES VIEW and onto the simpson without problems. Its beautiful about the north at the moment after the rains of recent times...
    (REMLR 235/MVCA 9) 80" -'49.(RUST), -'50 & '52. (53-parts) 88" -57 s1, -'63 -s2a -GS x 2-"Horrie"-112-769, "Vet"-112-429(-Vietnam-PRE 1ATF '65) ('66, s2a-as UN CIVPOL), Hans '73- s3 109" '56 s1 x2 77- s3 van (gone)& '12- 110

  4. #4
    Join Date
    Mar 2011
    Location
    Sydney
    Posts
    335
    Total Downloaded
    0
    Hey guys,

    I've opened the transfer case and everything looks well, no contaminants in the oil and no loose teeth. Car wheels freely and the transfer case is rotating fine. Gear box is fine, gears change fine and the motor seems well. I'm fairly sure its the clutch, who in Adelaide would have one?

  5. #5
    Join Date
    Sep 2007
    Location
    Gold Coast
    Posts
    6,078
    Total Downloaded
    0
    Sounds like it may be the Gearbox main shaft / transfer case input gear.

    Do you have any drive at all?

  6. #6
    Join Date
    May 2007
    Location
    Australia
    Posts
    2,827
    Total Downloaded
    0
    TRS in Adelaide will have the gear you need whatever it is and should be able to get anything to you same day if you call early enough.

    As already mentioned Tombie is in Whyalla. He may have some parts.

    cheers

  7. #7
    Join Date
    Nov 2009
    Location
    Ceduna, SA
    Posts
    254
    Total Downloaded
    0
    If the vehicle was underway and u lost drive doesnt sound like clutch as that only comes into play between gears.... Start her up in 1st with hand brake off... And foot off clutch..If u move and cant change gear then it looks clutch issue.... But if no movement then it is more likely the gearbox output shaft...
    James

  8. #8
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    18,616
    Total Downloaded
    0
    Quote Originally Posted by twodoors View Post
    But if no movement then it is more likely the gearbox output shaft...
    James
    I believe that can be checked by taking the round plate off the back of the tfr case and pulling some of the gears out and inspecting the spud shaft and gearbox output shaft splines.

    Garry
    REMLR 243

    2007 Range Rover Sport TDV6
    1977 FC 101
    1976 Jaguar XJ12C
    1973 Haflinger AP700
    1971 Jaguar V12 E-Type Series 3 Roadster
    1957 Series 1 88"
    1957 Series 1 88" Station Wagon

  9. #9
    Join Date
    Mar 2011
    Location
    Sydney
    Posts
    335
    Total Downloaded
    0
    Hey guys,

    I've just had the gearbox rebuilt about 10,000km ago so hopefully it's not a gearbox issue. I'm starting to stress as my vehicle is part of the support crew for a charity run across the Simpson and it looks like I wont make it

    If I start the car in gear the motor will start, car wont move. When I depress the clutch I can hear a slight rattle from the gearbox/transfer case area. I pulled the round cover and the inspection plate off the transfer case today and the transfer looks fine - oil came out clean.

    I'm seriously hoping I don't have a gearbox problem at this stage :/

    If it makes a difference when I lost drive, there was no bang - just a whining noise and loss of drive - followed by smoke and a burning clutch smell. I'll be camping outside the ARB here tonight. I'm quite upset.


  10. #10
    Join Date
    Feb 2010
    Location
    Deloraine, TAS
    Posts
    924
    Total Downloaded
    0
    Alex

    That's horrible timing mate. Hope you get it sorted ASAP and you get to the Simpson.
    Simon

    95 Defender HCPU 130

Page 1 of 5 123 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!