Page 4 of 5 FirstFirst ... 2345 LastLast
Results 31 to 40 of 42

Thread: Suzie dies on the Stuart Hwy

  1. #31
    Nera Donna Guest
    Wow, what an adventure. Pity things turned out the way they did, but I guess you have gained some valuable lessons. I know I have learnt some things from your experience. From what you have written in regards to the crossing, it might have been for the best anyway?
    Good luck with getting Suzie back on the road.
    Cheers
    Craig

  2. #32
    Join Date
    Mar 2011
    Location
    Sydney
    Posts
    335
    Total Downloaded
    0
    Hey Guys,

    I've got a headsup on Susie and it sounds a little concerning. The gearbox mechanic opened the box in Sydney today and called to let me know that the box has been run without oil and the workings are... buggered.

    The mechanic also said that there were no noticeable oil leaks and that all the gaskets were in decent condition. The box was rebuilt by him 4 months ago and since then it hasn't been touched at all. Where could all the oil have gone?

    Alex

  3. #33
    Join Date
    Apr 2009
    Location
    Crafers West South Australia
    Posts
    11,732
    Total Downloaded
    0
    Where could all the oil have gone?

    Sadly it may remain unknown but it highlights why you should check all driveline oils for colour and level, before any major trip, regardless.

  4. #34
    Join Date
    Aug 2006
    Location
    WA
    Posts
    13,786
    Total Downloaded
    0
    Quote Originally Posted by bee utey View Post
    Sadly it may remain unknown but it highlights why you should check all driveline oils for colour and level, before any major trip, regardless.
    What bee utey said.

    It is possible the oil was pumped into the t-case. Did the t-case leak?

    Btw - your box should be an LT85, not an LT77 - assuming yours is a factory isuzu.

    If you can spare the $$$, I would fit an isuzu box using Thegrubb's conversion kit.

  5. #35
    Join Date
    Mar 2011
    Location
    Sydney
    Posts
    335
    Total Downloaded
    0
    Quote Originally Posted by isuzurover View Post
    What bee utey said.

    It is possible the oil was pumped into the t-case. Did the t-case leak?

    Btw - your box should be an LT85, not an LT77 - assuming yours is a factory isuzu.

    If you can spare the $$$, I would fit an isuzu box using Thegrubb's conversion kit.
    But it's a 200Tdi :P

  6. #36
    Join Date
    Aug 2006
    Location
    WA
    Posts
    13,786
    Total Downloaded
    0
    Quote Originally Posted by alexturner View Post
    But it's a 200Tdi :P
    Ah - OK. I thought suzie was a reference to the engine, not the name(?) of the car.

    In that case I have a stumpy bellhousing in my shed which would allow you to fit an R380 if you can source one.

    Ben.

  7. #37
    Join Date
    Mar 2011
    Location
    Sydney
    Posts
    335
    Total Downloaded
    0
    Quote Originally Posted by isuzurover View Post
    Ah - OK. I thought suzie was a reference to the engine, not the name(?) of the car.

    In that case I have a stumpy bellhousing in my shed which would allow you to fit an R380 if you can source one.

    Ben.
    Haha, yes my 110 just looked like a Suzie so there we have it :P

    That'd be awesome mate, i hear that the output shaft from the motor is too long for the r380 or something along those lines... is the R380 a better box?

    Alex

  8. #38
    Join Date
    Aug 2006
    Location
    WA
    Posts
    13,786
    Total Downloaded
    0
    Quote Originally Posted by alexturner View Post
    Haha, yes my 110 just looked like a Suzie so there we have it :P

    That'd be awesome mate, i hear that the output shaft from the motor is too long for the r380 or something along those lines... is the R380 a better box?

    Alex
    Ashcroft Transmissions - Short Bellhousing R380

    Have a read of the above.

    The (late model) R380 is a much stronger box than the LT77.

    I bought all the bits to convert an R380 to a stumpy from ashcroft. I am happy to part with it for what I paid if it will get you out of a jam. You will of course need to find an R380.

  9. #39
    Join Date
    Mar 2011
    Location
    Sydney
    Posts
    335
    Total Downloaded
    0
    Hey guys,
    Well it turns out the box has been run without oil (for the second time). The mechanic has agreed to rebuild the box and re-condition for the cost of parts ($1500). He's also paying for shipping to Port Augusta and it's on its way. I'll be keeping a good eye on this one now :/

    Alex
    AlexTurner

  10. #40
    Bearman's Avatar
    Bearman is offline TopicToaster Gold Subscriber
    Join Date
    Jun 2006
    Location
    Hay Point
    Posts
    4,043
    Total Downloaded
    0
    Did he work out where the gearbox oil went?
    Cheers......Brian
    1985 110 V8 County
    1998 110 Perentie GS Cargo 6X6 ARN 202516 (Brutus)

Page 4 of 5 FirstFirst ... 2345 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!