Results 1 to 6 of 6

Thread: 95 Defender Ignition Switch Fell Apart

  1. #1
    Join Date
    May 2011
    Location
    Brisbane, Australia
    Posts
    7
    Total Downloaded
    0

    95 Defender Ignition Switch Fell Apart

    Stinkin hot and humid, tired and grumpy wife and 6yo, jump in the Landy and no go! No lights on the dash, no clicks, no cranking?? Grabbed the jumper leads and found a donor, no change?? Checked every fuse/connector/relay I could find, no change? Decided to have a look at the back of the ignition switch and as I was tugging on the wires the whole plastic disc with the contacts came off in my hand. At least it was then easy to bridge the right wires together and get home.

    Have not yet got the barrel out to have a look at rebuilding the switch.

    Has anyone else seen this?

    Where do I go for a new switch if I can't fix this one?

  2. #2
    Join Date
    May 2007
    Location
    in the wild New England, NSW
    Posts
    4,918
    Total Downloaded
    0
    Quote Originally Posted by ian_gregg View Post
    Stinkin hot and humid.........

    Where do I go for a new switch if I can't fix this one?
    Sounds like you coped with all the problems just fine

    When I've been up north I've found M R Automotive at Redcliffe (07) 3284 6688 good for parts & advice.

  3. #3
    Join Date
    Aug 2011
    Location
    Warburton WA
    Posts
    933
    Total Downloaded
    0

  4. #4
    Join Date
    Sep 2007
    Posts
    577
    Total Downloaded
    0

    steering/ignition lock failure

    yep have been through all that including the steering lock starting to drag/do strange things. Binned the whole lot and went to a missile switch and start button.

  5. #5
    Join Date
    Jan 2012
    Location
    kalgoorlie
    Posts
    26
    Total Downloaded
    0
    Had this happen to me a few weeks ago, bought a new unit through Linn Rover in Perth who sourced ex East for $130 odd plus air bag freight cost of $22, installed works a treat

  6. #6
    Join Date
    Mar 2008
    Location
    Nowra.....
    Posts
    189
    Total Downloaded
    0

    Ignition switch issues

    Ian,

    Had the back end of the 2002 130 ignition switch 'fall out', but managed to remove the lock and re-crimp. Then I had the starter position spring re-sign so now have to make sure key is re-set to ON.

    Would prefer the separate switches in future!

    CM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!