Page 1 of 7 123 ... LastLast
Results 1 to 10 of 66

Thread: My New MY12 Defender 90 is broken already!

  1. #1
    Join Date
    Feb 2012
    Location
    Sydney
    Posts
    76
    Total Downloaded
    0

    My New MY12 Defender 90 is broken already!

    Hi Guys,

    So far I have had the first 4000 km trouble free with my new 90, but on Saturday it got towed away to the dealers for repairs

    The engine started sounding really loud - like the windows were all wound down and then the little orange light on the dashboard lit up and the car went into a sort of shutdown mode. I limped to the nearest petrol station and rang the 24 hour Landrover assistance line. They were quite helpful - we tried the electronic reset (where you lock/unlock the doors with the remote 3 times) but that didn't work so they rang for a tow truck.

    It sounds like an electronics problem and no doubt when they connect it up to a diagnostic machine they will find the problem. But it was an inconvenient time for it to break down and I am without a car for a few days.

    Do any fellow Landy owners know what the problem might be - and is it common?

    cheers

    Andrew

  2. #2
    Join Date
    Nov 2008
    Location
    Gone
    Posts
    1,329
    Total Downloaded
    0
    Could have blown a turbo hose off, seems a common problem.

    Allan

  3. #3
    Join Date
    Jan 1970
    Location
    Down the road from Sydney
    Posts
    14,702
    Total Downloaded
    0
    or an EGR failure
    Our Land Rover does not leak oil! it just marks its territory.......




  4. #4
    Join Date
    Oct 2010
    Location
    Perth
    Posts
    1,191
    Total Downloaded
    0
    No idea but keep us informed. Watching with interest. Good luck.

  5. #5
    Join Date
    Oct 2011
    Location
    Burra NSW
    Posts
    933
    Total Downloaded
    0
    If it happened when the engine was cold or just warming up, it could be an over fueling in the common rail, typically sounds like an engine that has death rattles or an old engine pinging. It happened to me in my puma, turned out to be dirty fuel running thru a cold motor, having said that it's also happened in winter, below freezing point, the engine warning light came on, she went into limp home mode, I turned it off and waited about 10 min and it was as good as gold. On both occasions, the motor was cold or in the process of warming up.

  6. #6
    Join Date
    Feb 2012
    Location
    Sydney
    Posts
    76
    Total Downloaded
    0
    The motor was well and truly warm - been driving for 10 kms or so. I expect to hear from the dealers today and hopefully they have found what the problem is and are able to fix it without too many dramas.

  7. #7
    Join Date
    Nov 2007
    Location
    On the road.
    Posts
    1,946
    Total Downloaded
    0
    Quote Originally Posted by MuzzyDelta90 View Post
    But it was an inconvenient time for it to break down and I am without a car for a few days.
    surely they gave you a loaner to get around in?, if not i would be pretty peeved off.

  8. #8
    Join Date
    Feb 2012
    Location
    Sydney
    Posts
    76
    Total Downloaded
    0
    Good news! Just got a phone call from the Dealer at lunch today and they have found the problem and fixed it - apparently it was the turbo hose which had come off. There was also some recall thingy and that was sorted too - pick it up tomorrow after work.

    Yorkie, don't know about the loan car - it was towed away on Saturday and it's fixed now. Probably not enough time to sort one - however, I am going to try and get reimbursed for the $50 taxi fare that I paid on Saturday morning to get back home again.

  9. #9
    Join Date
    Jan 2012
    Location
    Sydney, Australia
    Posts
    115
    Total Downloaded
    0
    Glad you got it sorted!
    No such luck for me (with only 200km on the clock and the new car smell evaporating in the dealer's garage)

  10. #10
    Join Date
    Aug 2006
    Location
    WA
    Posts
    13,786
    Total Downloaded
    0
    So landrover is still not doing up bolts properly???

Page 1 of 7 123 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!