Thread: Defender radius arms

try a bit of semi permanant lock thread type stuff on em, am pretty sure you need to have the weight of them when doin em up

It might also be worth using new nyloc nuts as well as the loctite.

Originally Posted by purt

It might also be worth using new nyloc nuts as well as the loctite.

Don't use loctite, you'll regret it later.

New nylons are all you should need.

Do you mean the M20's on the chassis end or the M16's on the axle end?

I have seen a few M20 studs drilled and pinned in my time - to stop them working their way off, but I've never had the need.

Sent using Forum Runner

Originally Posted by mudder110

hi all anyone had any problems with radias arm nuts loosening seems mine want to loosen a bit every 1000ks or so.
allso can i nick em up without having to jack up the vehicle cheers from cairns.
98 110 300tdi full maxi drive conversion upgraded cvs
2inch lift 9000 warn ome susp
wrangler muddies
bigger intercooler
heapsa steel protection

Yeah big time, I've just put new bolts & nuts on near side cause I was getting a bad click on articulation from them.

Originally Posted by Yorkshire_Jon

Don't use loctite, you'll regret it later.

New nylons are all you should need.

Do you mean the M20's on the chassis end or the M16's on the axle end?

I have seen a few M20 studs drilled and pinned in my time - to stop them working their way off, but I've never had the need.

Sent using Forum Runner

hi jon yea seems to be the chassis ones will replace em all wont use the loctite unless absolutley needed thanks for the help