Results 1 to 6 of 6

Thread: Tc sensor

  1. 3rd June 2012, 07:42 PM #1
    hoopsnake
    hoopsnake is offline Fossicker
    Join Date
    Apr 2010
    Location
    echuca
    Posts
    15
    Total Downloaded
    0

    Tc sensor

    Hello all , I need some help my right hand front tc / abs sensor keeps on lifting up about 10mm causing my light to come on ! I have rebuilt my swivel hub so all new parts apart from sensor . It was happening before rebuild and now after rebuild . I push the sensor down but it only last about 2 km. any ideas ??
    Cheers
    Reply With Quote Reply With Quote
  2. 3rd June 2012, 09:24 PM #2
    steve_a
    steve_a is offline Master
    Join Date
    Dec 2008
    Location
    Yatala Vale, Adelaide, SA
    Posts
    340
    Total Downloaded
    0
    Speaking from D2 experience but is not secured by a bolt? I guess the other option if not is the good old silkaflex/silicone sealant to keep it in place?

    Just reading the WSM for a disco and the process is to push the sensor in until it actually contacts the ring. When it's driven the sensor will be pushed out to the right place. I guess you might substitute spinning the wheel to driving and then seal in place?

    Just shooting in the dark without knowing what year the vehicle is
    Reply With Quote Reply With Quote
  3. 3rd June 2012, 09:27 PM #3
    hoopsnake
    hoopsnake is offline Fossicker
    Join Date
    Apr 2010
    Location
    echuca
    Posts
    15
    Total Downloaded
    0
    Sorry it's a 2003 defender extreme
    Reply With Quote Reply With Quote
  4. 3rd June 2012, 09:53 PM #4
    djam1's Avatar
    djam1
    djam1 is offline ChatterBox
    Join Date
    Jan 1970
    Location
    Melrose SA
    Posts
    2,838
    Total Downloaded
    0
    Did you refit the bushing that holds tension on it when you put it back together?
    Reply With Quote Reply With Quote
  5. 4th June 2012, 05:26 PM #5
    hoopsnake
    hoopsnake is offline Fossicker
    Join Date
    Apr 2010
    Location
    echuca
    Posts
    15
    Total Downloaded
    0
    Yes replaced everything , new seal and cooper insert for sensor as well
    Reply With Quote Reply With Quote
  6. 4th June 2012, 06:40 PM #6
    Lorryman100's Avatar
    Lorryman100
    Lorryman100 is offline Master
    Join Date
    Jul 2011
    Location
    Scotland
    Posts
    191
    Total Downloaded
    0
    Is there enough slack in the ABS harness to account for suspension/steering travel? The harness could be pulling the sensor out of position causing the large air gap and illuminating the MIL?

    Brian.
    Reply With Quote Reply With Quote
« Small 90 Fuel Tank | EGR Valve Noise »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!