Results 1 to 6 of 6

Thread: Clutch for 200 tdi 93 deefer

  1. 28th July 2012, 04:00 PM #1
    Moon.dog62
    Moon.dog62 is offline Fossicker
    Join Date
    May 2012
    Location
    Perth
    Posts
    40
    Total Downloaded
    0

    Clutch for 200 tdi 93 deefer

    I love my defender but I have spent more on this car than the purchase price in the last 3 months. Anyway after getting the clutch master and slave cylinders replaced last week now the clutch is slipping like crazy and getting worse. I assume that the clutch now needs to be replaced. Could it be something else? If not how much will I be up for to get the clutch replaced( supply and fitting)?
    Thanks Moony
    Reply With Quote Reply With Quote
  2. 28th July 2012, 04:05 PM #2
    jx2mad's Avatar
    jx2mad
    jx2mad is offline ForumSage Subscriber
    Join Date
    Jan 1970
    Location
    Sussex Inlet. N.S.W.
    Posts
    6,908
    Total Downloaded
    0
    Hi Mooney. Have you checked for free play on clutch pedal? Is pedal releasing? Jim
    Jim VK2MAD
    -------------------------
    '17 Isuzu D-Max
    Reply With Quote Reply With Quote
  3. 28th July 2012, 04:10 PM #3
    Moon.dog62
    Moon.dog62 is offline Fossicker
    Join Date
    May 2012
    Location
    Perth
    Posts
    40
    Total Downloaded
    0
    What do I have to do to check this? It seems ok at low rpm but if I put my foot down it starts to slip.
    Reply With Quote Reply With Quote
  4. 29th July 2012, 08:25 AM #4
    centy
    centy is offline Fossicker
    Join Date
    Oct 2011
    Location
    North West Vic
    Posts
    72
    Total Downloaded
    0
    play in push rods means its releasing. if they are tight then it is not.
    i have seen this set wrong on a series brakes and they would build up and drag the brakes
    Reply With Quote Reply With Quote
  5. 30th July 2012, 09:42 PM #5
    Moon.dog62
    Moon.dog62 is offline Fossicker
    Join Date
    May 2012
    Location
    Perth
    Posts
    40
    Total Downloaded
    0
    Well its definately the clutch so up for a bunch more coin. My friends keep asking am i going to give up and sell it, but no chance, surely i must be close to having a good truck by now.
    Reply With Quote Reply With Quote
  6. 30th July 2012, 10:40 PM #6
    blue_mini's Avatar
    blue_mini
    blue_mini is offline Master
    Join Date
    Feb 2009
    Location
    Brisbane
    Posts
    285
    Total Downloaded
    0
    Have a look through a manual on how to adjust the master cylinder. I replaced my clutch because it was slipping, it was all fine. I put a heavy duty one in while it was out and when it went back together i had the slipping back again.

    Just had to lower the pedal and move the biting point and it was great. Until the slave cylinder let go but that's another story.
    Reply With Quote Reply With Quote
« Hayman-Reece 4000Kg receiver and Dixon-Bate pintle. | Laptop mount for Puma »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!