Moderator
No, that looks like the Rovingtracks (nee Rovertracks) one.Originally Posted by DeanoH
[snip]
goingbush's set up looks ideal though. Is this the Maxidrive version ?
[snip]
Deano
The Maxidrive one is heavy wall straight tube, (32mm ?) tapered at the ends.
I've had MD tie rod and drag links for ten years, they are excellent bits of kit.
They were the first bits I swapped out when I bought my Defender on the advice of a mate who was an engineer for the Perentie and at the time was still consulting to land Rover Australia.
The originals were bent and had been straightened.
Just a couple of weeks ago I paid $245 for the HD drag link and track rod (they come as a (pair). Hadn't seen the type goingbush has - looks a beauty. Why is alignment a problem with it? It's the same length no matter which direction the kink is facing.
cheers gerald
ForumSage
its a Rockware track rod from....
goingbush's set up looks ideal though. Is this the Maxidrive version ?
Deano
from expedition exchange, they have lots of neat Defender stuff
the track rod is here
Rock Ware -- EE -- Expedition Exchange Incorporated
.
ForumSage
Toe in/toe out is adjusted by rotating the track rod. This works because one TRE is right hand thread and the other is left hand thread, so rotating either lengthens or shortens, depending on direction. With the bent track rod you can't just rotate it....
Moderator
Ok, I thought it might have been one of Keith's (who is a member here too)
RovingTracks Heavy Duty Land Rover Accessories
ForumSage
yep, you have to undo a tie rod end from its taper and turn it one turn at a time to adjust it, . a Pain, but a lot less painful than bending a track rod.
Wheel alignment places won't touch you which is a good thing because they are yet to do any Defender correctly, they all give them toe IN !!!.
Moderator
Which is why I've only ever done my own alignment
A string line is your friend
OldBushie
I've done mine with a tape measure on live axle jobbies, then had them checked, no probs, all can't believe I did it with a tape!Which is why I've only ever done my own alignment
A string line is your friend
I think we had this convo many moons ago
ForumSage
Well one thing is for sure, You will get a better job done using a piece of string or a tape measure than going to a wheel Alignment specialist. What a con job they are.
I use a piece of 5/8 gal electrical conduit with a threaded adjustment on one end and measure the distance between the inside of the rims at the rear then the front, if the front is 0.5 - 1mm wider than the rear I know its all good
Moderator
Matt I think you're right !I've done mine with a tape measure on live axle jobbies, then had them checked, no probs, all can't believe I did it with a tape!
I think we had this convo many moons ago
I used to wheel align open wheel race cars with a string line, that's toe at both ends, camber at bother ends and castor and was paid to do it
OK I used a digi inclinometer for camber/caster (or a Dunlop gauge, but they are fiddly bloody things) but the basis for everything was the string line.
A laser aligner is only a string line made from light
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Reply With Quote
Bookmarks