Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: County/Defender experts....

  1. 25th October 2012, 02:55 PM #1
    milsy's Avatar
    milsy
    milsy is offline Fossicker
    Join Date
    Dec 2009
    Location
    Brisbane QLD
    Posts
    72
    Total Downloaded
    0

    County/Defender experts....

    Hi guys,

    I stated expert, but maybe not really. I have an old 1987 county/defender that was originally an import from Germany. It is RHD and in decent shape. However, it runs LHD wipers and I want to switch them to RHD obviously.
    I have ordered some RHD arms, but do the spindles and the wiper motor and cabling need to be changed? I am assuming it wouldn't be too hard a change as Defenders are what they are.

    Any advice would be great.

    Cheers.
    Attached Images Attached Images
    Reply With Quote Reply With Quote
  2. 25th October 2012, 03:02 PM #2
    JDNSW's Avatar
    JDNSW
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,510
    Total Downloaded
    0
    After a quick look at mine, it looks as if you will need to swap the wiper positions to the locations where there is a black plug in your picture. Since the motor is on the left, and you are moving the wipers to the right, you will need to get a longer rack cable and outer pipe. Probably best from a wrecker.

    You will need to disassemble a fair bit of the dash to get at them. The wheel boxes will be the same.

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol
    Reply With Quote Reply With Quote
  3. 26th October 2012, 03:53 PM #3
    milsy's Avatar
    milsy
    milsy is offline Fossicker
    Join Date
    Dec 2009
    Location
    Brisbane QLD
    Posts
    72
    Total Downloaded
    0
    Hi John,

    Cheers for that. Would it be easier to relocate the wiper motor to the right if that where the RHD sits? Or will a cable be easy enough to source?
    Reply With Quote Reply With Quote
  4. 26th October 2012, 04:30 PM #4
    JDNSW's Avatar
    JDNSW
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,510
    Total Downloaded
    0
    Quote Originally Posted by milsy View Post
    Hi John,

    Cheers for that. Would it be easier to relocate the wiper motor to the right if that where the RHD sits? Or will a cable be easy enough to source?
    Wiper motor is in the same place for LHD and RHD. You may have problems sourcing the cable new, as they rarely need replacing, but there must be any number of dead Defenders/110s about - same system as used for Series 2a/3, but they had the wipers in a different location, so lengths will be wrong.

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol
    Reply With Quote Reply With Quote
  5. 27th October 2012, 07:59 AM #5
    milsy's Avatar
    milsy
    milsy is offline Fossicker
    Join Date
    Dec 2009
    Location
    Brisbane QLD
    Posts
    72
    Total Downloaded
    0
    Ah ok no probs. I have just ordered a cut to fit one from RimmerBros in the UK. I'm just trying to sort out all parts before removing the dash.
    Reply With Quote Reply With Quote
  6. 27th October 2012, 09:03 AM #6
    LowRanger's Avatar
    LowRanger
    LowRanger is offline ChatterBox Subscriber
    Join Date
    Nov 2009
    Location
    Western Sydney
    Posts
    2,182
    Total Downloaded
    0
    Another thing to consider is,that you may require a new park switch,so that they park to the left and not the right.
    Wayne
    ​VK2VRC
    "LandRover" What the Japanese aspire to be
    Taking the road less travelled
    '01 130 dualcab HCPU locked and loaded
    LowRange 116.76:1
    Reply With Quote Reply With Quote
  7. 27th October 2012, 12:04 PM #7
    milsy's Avatar
    milsy
    milsy is offline Fossicker
    Join Date
    Dec 2009
    Location
    Brisbane QLD
    Posts
    72
    Total Downloaded
    0
    It goes on and on! So what is this park switch?
    Reply With Quote Reply With Quote
  8. 27th October 2012, 12:05 PM #8
    milsy's Avatar
    milsy
    milsy is offline Fossicker
    Join Date
    Dec 2009
    Location
    Brisbane QLD
    Posts
    72
    Total Downloaded
    0
    Quote Originally Posted by milsy View Post
    It goes on and on! So what is this park switch?
    Found it, disregard! I have ordered a new motor anyway, so I am assuming that the park switch of the new one will be fine.

    I now have, new motor, new rack cable, new spindles. So hopefully that should cover everything. Missing anything?
    Reply With Quote Reply With Quote
  9. 27th October 2012, 03:46 PM #9
    LowRanger's Avatar
    LowRanger
    LowRanger is offline ChatterBox Subscriber
    Join Date
    Nov 2009
    Location
    Western Sydney
    Posts
    2,182
    Total Downloaded
    0
    Sounds about all you will need to me.apart from a little bit of time.
    You should be able to change the motor and cables in under 1/2 Hr.I did mine in about 20 minutes
    Wayne
    ​VK2VRC
    "LandRover" What the Japanese aspire to be
    Taking the road less travelled
    '01 130 dualcab HCPU locked and loaded
    LowRange 116.76:1
    Reply With Quote Reply With Quote
  10. 22nd December 2012, 09:20 AM #10
    milsy's Avatar
    milsy
    milsy is offline Fossicker
    Join Date
    Dec 2009
    Location
    Brisbane QLD
    Posts
    72
    Total Downloaded
    0
    Hi guys,

    Ok so got everything stripped off and fitted up, but have a problem..... New motor new everything, and it still wants to turn the incorrect way. So it wants the wipers to start in the upright position.

    Have I missed something very simple here or do I need to change something somewhere else? I have a new motor from the UK, so am assuming the white box on it is the new park switch? Do I need to change the colour sequence that plugs into or out of it?

    Urgent help is required due to me having the dash off. Thanks guys.

    Brett
    Reply With Quote Reply With Quote
Page 1 of 2 12 LastLast
« defender anti-stall in action | Is there a trick to changing headlight bulbs??? »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!