Results 1 to 4 of 4

Thread: 95 defender 130 bump stop clearance

  1. 27th January 2013, 04:48 PM #1
    oliver1981
    oliver1981 is offline Fossicker
    Join Date
    Jan 2008
    Location
    Canberra ACT
    Posts
    78
    Total Downloaded
    0

    95 defender 130 bump stop clearance

    Hi all,

    Trying to measure the sag in front end of defender from factory height to adequately select new king springs.

    Have on front:
    Arb steel which bar
    Warn 9500
    Spotlights
    Bonnet mounted 235/85 on disco 1 rim

    Can someone send me the factory measurement please? Also, if anyone has similar setup on front what updated springs did you go for?

    Thanks in advance
    Reply With Quote Reply With Quote
  2. 27th January 2013, 06:35 PM #2
    Yorkshire_Jon's Avatar
    Yorkshire_Jon
    Yorkshire_Jon is offline Wizard Supporter
    Join Date
    Mar 2008
    Location
    Sydney, NSW
    Posts
    1,484
    Total Downloaded
    0
    Do a search, this has been covered a few days ago, thread started by Mike Beecham.

    King Springs for the front should be KRFR-03 or KRFR-03HD. With a steel rope and bonnet mounted spare Id suggest the HD's.

    This will give you approx a 30mm lift by the time everything is all settled in.


    As for the Rears, KLRR-05, or if your heavily loaded ALL the time, KLRR-05HD.

    hth
    J
    Regards,
    Jon
    Reply With Quote Reply With Quote
  3. 27th January 2013, 06:54 PM #3
    decibelcore
    decibelcore is offline Master
    Join Date
    Oct 2007
    Location
    Albury NSW
    Posts
    129
    Total Downloaded
    0
    Hi Oliver

    I have a 96 110 with the same equipment, bump stop to the ground is 520mm with brand new 235/85/16 s

    Rubber Bump stop to axle stop is 90mm.

    Only thing different to yours is I'm not feeling energetic to get the spare spare out and mount on the bonnet!

    From memory I think I have the HD 130 springs

    Hope this helps

    Decibelcore
    Reply With Quote Reply With Quote
  4. 27th January 2013, 08:19 PM #4
    rick130's Avatar
    rick130
    rick130 is offline Moderator Gold Subscriber
    Join Date
    Jan 1970
    Location
    NSW far north coast
    Posts
    17,285
    Total Downloaded
    0
    Quote Originally Posted by decibelcore View Post
    Hi Oliver

    I have a 96 110 with the same equipment, bump stop to the ground is 520mm with brand new 235/85/16 s

    Rubber Bump stop to axle stop is 90mm.

    Only thing different to yours is I'm not feeling energetic to get the spare spare out and mount on the bonnet!

    From memory I think I have the HD 130 springs

    Hope this helps

    Decibelcore
    If you have 90mm between the bumps stop and pad your springs are taller than stock.

    Standard 130 HD springs, LR/ARB bar and a Warn XD900 winch + wire and you'll have around 65mm or so between the BS and pad.
    Reply With Quote Reply With Quote
« I'm back in a Defender!!!!!!!!!!!!!!!!!!!! | gvm calculator »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!