Thread: How to Install Carpet over Dynamat.

You won't get it tight enough or secure enough with Velcro

What you need to do it what we call in the trade Dual Bonding. So stick the Dynamat to the car and then with some permeant carpet adhesive ( can be bought at Bunnings. ) stick the marine carpet to it. If you want to be able to remove the marine carpet and take it out then instead of permanent adhesive use what we call PS adhesive or Pressure sensitive adhesive. ( again sometimes called tackifier ) as it never really sets and you can take the carpet on and off the underlay when you want.




Ali

Thanks for that. Do think either adhesive will take to the foil like surface of the Dynamat.

Tony

Originally Posted by tonyci

Thanks for that. Do think either adhesive will take to the foil like surface of the Dynamat.

Tony

No it won't.

I am a carpet fitter by trade and now am the Dunlop Flooring Qld State manger and we are the leaders in carpet Underlay in Australia. We have products the same as Dynamat which are used in hotels exhibitions centres and Airsports all over the world using the same system.

Thanks Again. I think I will try and track down some PS Adhesive.
Cheers
Tony

Gluing carpet to the mat will transmit more noise. You need an insulation layer like closed cell foam in between and not bonded. Fix the carpet at the edges only.

might be better off laying down a layer of closed cell foam on the dynamat and then some thick heavy rubber cut to size - the weight of the rubber will old it all down. Vertical sides you could bond or use a strip of aluminium extrusion and screw/rivet.

Originally Posted by Reads90

No it won't.

I am a carpet fitter by trade and now am the Dunlop Flooring Qld State manger and we are the leaders in carpet Underlay in Australia. We have products the same as Dynamat which are used in hotels exhibitions centres and Airsports all over the world using the same system.

Have you got enough off cuts to do a lwb series 3 in the back of your van ?

Originally Posted by Dougal

Gluing carpet to the mat will transmit more noise. You need an insulation layer like closed cell foam in between and not bonded. Fix the carpet at the edges only.

How do you come up with that. I can't see how it make a noticeable difference to noise if it is glued or lose lay the carpet

Also the carpet will ruck and stretch in the middle if you do that. The marine style carpet is a needle pinch and designed to be stuck all over and not stuck around the edges. It does not have the strength in the backing for that.

And if you want to use closed cell foam then why bother with the dynamat.