Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: UHF and where to install

  1. #11
    Join Date
    Mar 2011
    Location
    Melbourne
    Posts
    31
    Total Downloaded
    0
    My Uniden 7700 fits very easily mounted on the side of the cubby next to the drivers seat. I have a space saving sub behind the cubby but i wouldn't like that location as i do play with the channels and volume quite a bit.

    Still working out where to store the mic other than in my lap or down the same side of the seat though...

  2. #12
    Join Date
    Mar 2011
    Location
    Newcastle NSW
    Posts
    39
    Total Downloaded
    0
    Another with the radio mounted on the right hand side of the cubby box. Mic located on the front angled section. Only downfall I can see is dust/crumbs etc accumulate on the recessed LCD screen. (elderly GME TX3200)

  3. #13
    austastar's Avatar
    austastar is offline YarnMaster Silver Subscriber
    Join Date
    Jul 2009
    Location
    Hobart
    Posts
    3,532
    Total Downloaded
    0
    Hi,
    again right hand side of cubby. I made an angle bracket from aluminium for the radio and hold the bracket down by putting it under the edge of the cubby and screwing it down.
    A temp mounting until I sort out what I will do with a new 80 channel model.

    cheers

  4. #14
    Join Date
    Feb 2010
    Location
    Sutherland Shire, Sydney
    Posts
    844
    Total Downloaded
    0
    I had a compact unit mounted on the dash. Practical, but the dash ended up a bit cluttered:


    In the next car I moved it to a roof console which works well. Using an extension cable, the microphone was later mounted in place of the cigarette lighter which I thought was better than having the mic overhead:

    Attached Images Attached Images

Page 2 of 2 FirstFirst 12

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!