Thread: Owners not enthusiasts!

Now I have your attention, I was going to post this rather boring question in the freelander section but I see posts on there are few and far between, (it seems that the freelander crew are more owners than enthusiasts) so I thought I would ask here.

I am trying to rig up the fabled cruise control on my 2004 TD5 Defender and have got hold of a freelander rear window switch as the set/resume and a defender heated seat switch as the master switch.

My question is does anybody know what each pin for these switches?

Many thanks

John

Thanks for the reply,

I had seeen that post and that was probably one of the most useful out there.

What I was actually after was what each if the pins on the freelander window and the heated seat switch are? the freelander switch has 6 pins numbered 1-6.

I have found this for the heated seat switch so it should be all good for the master swith to sockets 10 & 15 on the black ecu plug.

Pin 1 = 12V+ power in
Pin 2 = Switch illumination (on with parking lights)
Pin 3 = Earth for switch illumination and telltale
Pin 4 = Switched power out (to heated seat relay)
Pin 5 = Blank