Thread: Dual Cab rear seating

Those are definitely 110 puma rear seats, as they have the extra slant on the back piece.

If you hop on carsales.com.au and have a look at puma 130's, you can see the rear seat is pretty much 90degrees, and does not have that slant.

My guess is they bought a set of 110 puma rear seats and retro-fitted them to their 130. Which is awesome, as the older defender rear seats are horrible!

Another opinion on what may or may not have been done to your seats- The seats are the same as what's in my '08 Puma 130. With the standard setup, the seats sit very upright, uncomfortably so (doesn't worry me as I never sit in the back). Your seats appear to have been installed with the base mount moved about 4" forward, to increase the angle that the seats lean back, presumably to make them more comfortable. This has obviously been done at the cost of 4" of leg room; also I think your front seats must need tpo be all the way forward for the rear seats to fold forward? Those plates that bridge the big hole look like they have been fitted to give the rear mounting business something to be bolted to- in the standard configuration, the mounting is about where these plates are bolted down, just in front of the rear bulkhead.
In the Puma models, there is no opening in the top of the big rectangular box under the seats, it is an inaccessible void. Some have put water tanks in there, others have made an opening in the top or the end for stowing odds & ends. I'm undecided whether to do either of these things on mine, having an opening in the top is a bit pointless if you have to unbolt the seat backs to tilt forward for access.