Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: Suspension in 2012 110.

  1. #1
    Join Date
    Aug 2013
    Location
    newcastle
    Posts
    411
    Total Downloaded
    0

    Suspension in 2012 110.

    I have been very happy with all aspects of the 110 so far with 5000km on the clock and loading her up nearly every weekend for camping trips with the family.

    I just got back from a trip to Barrington and it is the first time I have encountered boney corrugated dirt road in the Defender and this road had about 45mins worth of bone jarring nauseum, I feel sorry for the poor Grader driver who has to try and work with that material. I went up on my own this time so the car wasn't really carrying anything substantial weight wise. I could handle it but I don't think my wife and children could, no matter what speed I travelled at and I was planning on going back with them soon.

    I have been reading about a few of the guys who switched to Firestone Airbags and wandering if this will solve my problem. I am a bit hesitant about messing with anything that is related to handling and suspension dynamics outside of factory. Also some people have raised the concern of bigger problems should one fail when out in isolation but that could happen to any engine part I guess.

    Thoughts thanks guys.

    Cheers

  2. #2
    Join Date
    Jul 2011
    Location
    Yarrawonga, Vic
    Posts
    6,568
    Total Downloaded
    0
    Sounds like your tyres are too hard,
    What tyre pressures are you running ?

  3. #3
    Join Date
    Aug 2013
    Location
    newcastle
    Posts
    411
    Total Downloaded
    0
    Quote Originally Posted by goingbush View Post
    Sounds like your tyres are too hard,
    What tyre pressures are you running ?
    45 psi from memory mate. Never really considered that though is it was the factory setting from when I pick up the car.

  4. #4
    redrovertdi Guest
    I generally run at 36 pounds[300tdi 110] with more air in the back subject to load, 45 alround is way to hard on the car and passengers in my opinion

  5. #5
    Join Date
    Mar 2012
    Location
    Brisbne
    Posts
    631
    Total Downloaded
    0
    Agree with those above, my 90 was unbearable at 40+psi running 38psi all round now much more bearable, on corrugations Id possibly go to 36/34 to soften it out.
    Leroy

  6. #6
    Join Date
    Aug 2013
    Location
    newcastle
    Posts
    411
    Total Downloaded
    0
    Quote Originally Posted by redrovertdi View Post
    I generally run at 36 pounds[300tdi 110] with more air in the back subject to load, 45 alround is way to hard on the car and passengers in my opinion
    Is that on all terrain tyres??

    Happy to try it if it is.

    Thanks

  7. #7
    Join Date
    Aug 2013
    Location
    newcastle
    Posts
    411
    Total Downloaded
    0
    Quote Originally Posted by Leroy_Riding View Post
    Agree with those above, my 90 was unbearable at 40+psi running 38psi all round now much more bearable, on corrugations Id possibly go to 36/34 to soften it out.
    Leroy
    Ok thanks Leroy.

  8. #8
    Join Date
    Jul 2011
    Location
    Yarrawonga, Vic
    Posts
    6,568
    Total Downloaded
    0
    there is your problem, this pressures are way high.

    235 / 85 r16 AT's
    I run 28 front , 32 rear with 110 empty ,
    loaded its 32 front 40 rear

  9. #9
    Join Date
    May 2008
    Location
    Horsley Park, Sydney
    Posts
    2,939
    Total Downloaded
    0
    What speed were you doing?



    Corrugations tend to ride better when sitting above 70kms per hour. Any less than this can be quite uncomfortable. We travel the Gove road a lot with over 600kms of corrugations each way and try to stay above 80kms per hour. At this speed the corrugations all but disappear.


    We run a a bit under 40psi on BFG mud terrains. (vehicle loaded and towing a boat) Also have Polyairs in the rear, pressurised to level the vehicle.




    Erich

  10. #10
    Join Date
    Oct 2008
    Posts
    917
    Total Downloaded
    0
    I also agree with tyre pressures , 32/28 see to work really well on corrugations.

    One other thing that might be worth trying - and something I recently did on my 2003 Defender - I had the springs changed to longer but softer springs. I gained about 1-2" in ride height. I'm not sure of the rates but they were a little bit softer than stock, but the ride is unbelievably smooth now. It glides over bumps and corrugations instead of shaking itself to bits. I used to drive range rovers, and am used to the soft almost floating ride, and it's a lot closer to that now. In fact I just got back from a corrugated road trip with a smile on my face with the way it handled.

    Only slight issue is that the TD5 does not have sway bars, so it does tend to lean a little bit more in corners, but nothing like the old Range Rover used to do.

    The advantage of softer longer springs is that you don't need engineering certificates, the total cost is around $400-$500 and you keep the vehicle stock from a warranty perspective. And you also gain significant increases in offroad articulation.

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!