Results 1 to 7 of 7

Thread: Age old dual battery fitment question re: Century batteries

  1. #1
    Join Date
    Jul 2011
    Location
    perth
    Posts
    252
    Total Downloaded
    0

    Age old dual battery fitment question re: Century batteries

    Hi all,

    I know this topic has been covered, but i couldnt find anything particular to these two batteries.

    I am wanting to get the following two batteries

    N70ZZL4WD
    Century N70ZZL4WD Hi Performance
    Length 305mm x Width 172mm x Height 225mm

    and

    C12-100DA
    Century C12-100DA Deep Cycle - AGM
    Length 306.5mm x Width 168.5mm x Height 235mm

    They are roughly the same size, but will they both fit in the battery box, if turned 90° the the orientation of the original?

    Thanks

  2. #2
    Join Date
    Oct 2006
    Location
    canberra
    Posts
    3,002
    Total Downloaded
    0
    I have a century deep cycle/start batt in the disco and its a cracker. In the defender I have two n70 sized bats running lenth ways down the battery box so should fit

  3. #3
    Join Date
    Oct 2012
    Location
    southwest victoria
    Posts
    85
    Total Downloaded
    0
    I have the C12-100DA with original cranking battery.

    I'm 90% sure it will fit once I raise the original battery 25mm and move it over a bit closer to the door.

    90% because I haven't got around to it yet

    I haven't figured out how to secure them... vaguely thinking of using those "belt" style ratchet strap things...

  4. #4
    2stroke Guest
    I have 2 N70s in mine, mounted east west. I ended up cutting the outer bottom of the battery compartment and welding in a squared off corner to enable them to sit a little further outboard and saved disturbing all the AC wiring. I felt raising the batteries would put the terminals way too close to the hatch also.

  5. #5
    Join Date
    Sep 2008
    Location
    Geelong, VIC
    Posts
    4,442
    Total Downloaded
    0
    I've got a N70 and one of these:
    Super Start Batteries > Products > Product List

    Mounted east-west on a raised spacer. Too high to fit the battery box lid and don't think I could get them in if I had A/C relays etc in the battery box.

    Steve
    1985 County - Isuzu 4bd1 with HX30W turbo, LT95, 255/85-16 KM2's
    1988 120 with rust and potential
    1999 300tdi 130 single cab - "stock as bro"
    2003 D2a Td5 - the boss's daily drive

  6. #6
    Join Date
    Nov 2013
    Location
    Blue Mountains
    Posts
    24
    Total Downloaded
    0

    what i did....

    How I fitted 2 in...






  7. #7
    Join Date
    Nov 2013
    Location
    Blue Mountains
    Posts
    24
    Total Downloaded
    0

    continued

    can't find pics of the finished job so will take a couple later and put them up if i can still get my head around how to do it.
    Phill.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!