Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Which rear springs for when I'm touring

  1. #1
    Join Date
    Feb 2005
    Location
    Bracken Ridge - Brisbane - QLD
    Posts
    14,276
    Total Downloaded
    0

    Which rear springs for when I'm touring

    I have the filling up front KRFR-03's with billies which I think are a touch harsh (springs that is)

    Chasing a second set of springs to pop in for touring....with five of us the cargo area is is full plus some gear on the roof rack.....and a camper trailer tow ball weight of say 150kg

    The rig sags a little in the rear

    I was given a set of lovells on the weekend but am unsure of there spec apart from having 22mm? wire instead of 21mm?

    So what's everybody running with a fully loaded 110 and camper trailer.....I'm happy with the billies on the back.......just thought springs are cheap and easy to swap over

  2. #2
    Join Date
    May 2008
    Location
    Horsley Park, Sydney
    Posts
    2,939
    Total Downloaded
    0
    Have you considered polyairs, very good for such situations. I run these on our Defender and used to run them on our D2 when loaded up and towing a boat on holidays. I load level on a level surface using a tape measure before setting off and deflate again when we get back.

    Be careful not to over inflate them though, we go to a maximum of 25psi and no less than about 8psi.



    Erich

  3. #3
    Join Date
    Feb 2005
    Location
    Bracken Ridge - Brisbane - QLD
    Posts
    14,276
    Total Downloaded
    0
    Quote Originally Posted by Bundalene View Post
    Have you considered polyairs, very good for such situations. I run these on our Defender and used to run them on our D2 when loaded up and towing a boat on holidays. I load level on a level surface using a tape measure before setting off and deflate again when we get back.

    Be careful not to over inflate them though, we go to a maximum of 25psi and no less than about 8psi.



    Erich


    polyair were fitted when I bought the rig...........they were probably 10+ years old when one failed


    just not sure if they are worth the price for using them maybe twice a year

  4. #4
    Join Date
    Apr 2013
    Location
    NSW, Sydney
    Posts
    926
    Total Downloaded
    0
    Quote Originally Posted by weeds View Post
    polyair were fitted when I bought the rig...........they were probably 10+ years old when one failed

    just not sure if they are worth the price for using them maybe twice a year
    Hmm.

    I'm tossing up if I buy a set myself - even if I don't use them that often I like the idea: they do mean I don't need to run stiffer springs for the "every other day minus two times per year"

  5. #5
    Ringky Guest
    Hi Weeds,
    We recently replaced OMEs + polybags + Bilsteins with Medium terrafirma 2 inch prosport shocks and springs. I kept the polybags in too assuming we would still need them, however fully loaded with the five of us and camper trailer the springs sag perhaps an inch (but the setup is slightly rear tall anyway) and looks and rides perfectly balanced. The only downside is the springs are slightly stiffer. I havent had a need to put any air above the minimum 8psi required into the bags.

  6. #6
    Join Date
    Oct 2010
    Location
    Adelaide Hills
    Posts
    766
    Total Downloaded
    0
    I third the Polyairs or Firestones in my case. The heavy duty springs make the ride in a Defender pretty ordinary IMO. Tried Lovells HD, went to a lighter Kings spring but they were still too harsh. Ended up going with 270lb rear springs from LRA with the airbags. Mine is a hardtop and with two wheels hanging of a rear bar, and a full kit of camping gear for two people plus water etc, the rear bags don't need much pressure at all to keep it level.

    Best of all it rides real nice with and without a load.

    LRA sell a 320lb rear from memory that would be worth considering.

  7. #7
    n plus one Guest
    As others have said airbags would be ideal for your needs - either that or just run the softer springs and deal with a bit of sag when loaded. No point pinging of every bump for the rest of the year.

  8. #8
    Join Date
    Feb 2007
    Posts
    122
    Total Downloaded
    0
    I had 130 helper springs in mine. It still rode fairly well for day to day duties and handled the extra touring weight well

    Rob

  9. #9
    Join Date
    Feb 2005
    Location
    Bracken Ridge - Brisbane - QLD
    Posts
    14,276
    Total Downloaded
    0
    Quote Originally Posted by tuffrangie View Post
    I had 130 helper springs in mine. It still rode fairly well for day to day duties and handled the extra touring weight well

    Rob
    Yes have thought about doing the 130 set up

  10. #10
    Join Date
    Apr 2007
    Location
    Brisbane
    Posts
    591
    Total Downloaded
    0
    I fitted the Nissan airbag kit that was listed on another thread here. All I had to make was the steel top plates and welded them in, took about two hours to fit including routing the air tubes into the back of the truck.

    We did 20,000km on some of the roughest road in Australia, and they worked great. We had two tons on the rear axle, and put just enough air in to keep the stock ride height. Best thing was we kept the stock springs, and when we unloaded most stuff at the end of the trip, we just had to lower the air pressure down to around 5 psi. A little bicycle pump works great for pumping then up.

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!