Thread: Puma seats into Isuzu county

Hope this is what you were after. The measurement is 9 1/2 inches along the bottom of the chamfer.

Good video on fitting the rear seats here. Please post what you learn, I'm thinking of doing this.

[ame=http://www.youtube.com/watch?v=1TSPWf0s3is]Retro fitting new style defender rear seats into a 1991 county 110 - YouTube[/ame]

Originally Posted by Dorian

Hope this is what you were after. The measurement is 9 1/2 inches along the bottom of the chamfer.

Thanks Dorian. Can you please measure a few more bits for me. If you can imagine the chamfer making a right angled triangle, with the tape measure being the bottom, can you provide measurements for the other two sides please. I'll draw the triangle on mine and use that to cut out the shape I need.

Does anyone know if the plastic shroud around the floor brackets has to be fitted? I'm thinking of just having the metal brackets only...

County
the 9.5 is the length along the bottom (241) , the hypotenuse is 320 mm. the height is the same as the shelf height of the car. I have lined my cargo bay with Dyna mat so the dims are estimated to be what they should be without the matting. Apologies, went fishing yesterday so didn't log in.

You don't need the plastic cover, but a couple of things, with it on you can slide boxes over the bracket, you will have to cut the holders for the cover that should be on it now. If you put carpet in the rear the cover anchors the carpet pretty well.

Thanks Dorian,
AFAIK the shelf height in the pumas is different to previous models. Any chance you could post that measurement as we'll so I can check?

Lets say A & B are the 2 right angle sides of your triangle, C is the long side or Hypotenuse.

A squared + B squared = C squared

C squared = 320 squared = 102400

A squared = 241 squared = 58081

B squared = C squared - A squared = 44319

B = square root of 44319

B = 210.5207828 say 210.5mm

Originally Posted by uninformed

Lets say A & B are the 2 right angle sides of your triangle, C is the long side or Hypotenuse.

A squared + B squared = C squared

C squared = 320 squared = 102400

A squared = 241 squared = 58081

B squared = C squared - A squared = 44319

B = square root of 44319

B = 210.5207828 say 210.5mm

Haha, I actually knew that.

I remember betting my maths teacher that I would never need to use trig in the real world... Now I owe him my favourite hypercolour tshirt.