Page 3 of 7 FirstFirst 12345 ... LastLast
Results 21 to 30 of 63

Thread: Why is the Defender wading depth only 500mm?

  1. #21
    Join Date
    Dec 2007
    Posts
    121
    Total Downloaded
    0
    Potentiometer doesn't have problems with water. I had to go through this flood every day last year during 3 weeks and no problems at all with the throttle. HOwever, A/C pulley's bearing was another story.....

    https://www.youtube.com/watch?v=NKIwQMIHKeg

  2. #22
    Join Date
    Jan 1970
    Location
    Nanny state UK...
    Posts
    3,253
    Total Downloaded
    0
    Quote Originally Posted by PAT303 View Post
    Thats the smart way. Pat
    Indeed... People forget just how powerful water is and it doesn't take much to get you into trouble. To put that into context:

    If 1L = 1kg = 10 cm3
    Therefore
    1M3 = 1000L = 1Tonne!!!

    When fording, you can be pushing sever tonne of water... Or have several tonne of water, pushing on the side of the car!!

    They also forget that if the water is deep enough, the car becomes buoyant... Once you reach that point, it only needs the slightest of flow and you're at the mercy of the current. People die, every year due to that one...

    M

  3. #23
    Join Date
    Apr 2007
    Location
    Brisbane
    Posts
    591
    Total Downloaded
    0
    Is there a standard definition of "wading". Mercedes Benz only rate Unimogs at 1.2m "wading depth". Unimogs have air pressurised axle, transfer case/gearbox etc, and rubber seals and things like the dipstick and oil cap even though are 1.6m about the ground.

    According to an engineer who used to work at MB their definition of wading to be able to stop in water 1.2m deep for a minimum of 2 hours at idle, and then drive off without any effect on the vehicle.

    Not sure if this is a DIN standard but I expect manufactures are talking about being in the water for a lot longer than just the few seconds in a river crossing.

  4. #24
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,495
    Total Downloaded
    0
    Quote Originally Posted by Iain_B View Post
    Is there a standard definition of "wading". Mercedes Benz only rate Unimogs at 1.2m "wading depth". Unimogs have air pressurised axle, transfer case/gearbox etc, and rubber seals and things like the dipstick and oil cap even though are 1.6m about the ground.

    According to an engineer who used to work at MB their definition of wading to be able to stop in water 1.2m deep for a minimum of 2 hours at idle, and then drive off without any effect on the vehicle.

    Not sure if this is a DIN standard but I expect manufactures are talking about being in the water for a lot longer than just the few seconds in a river crossing.

    on most mogs the batteries are at 1.2m as is the front crank seal.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.

  5. #25
    Join Date
    Apr 2013
    Location
    NSW, Sydney
    Posts
    926
    Total Downloaded
    0
    None of these are me (or hopefully will ever be!)

    [ame="http://www.youtube.com/watch?v=Ro48lL1YZIw"]DEEP WATER CROSSINGS !!! 4wd 4x4 offroad - YouTube[/ame]

    PS: Is the Land Rover at 5:55 anyone on here?

  6. #26
    Join Date
    Jan 1970
    Location
    Gold Coast
    Posts
    5,101
    Total Downloaded
    0
    So none of you have been or plan to go to Cape York?

    Somethimes crossing a creek deeper than 500mm is the only way through. Yes a person has the choice….

  7. #27
    Join Date
    Apr 2013
    Location
    NSW, Sydney
    Posts
    926
    Total Downloaded
    0
    Quote Originally Posted by uninformed View Post
    So none of you have been or plan to go to Cape York?

    Somethimes crossing a creek deeper than 500mm is the only way through. Yes a person has the choice….
    Yes I do plan to go to the Cape, and that's part of the reason I ask.

    There are times where it is be necessary to go deeper than 500mm in order to get to where you want to be, or face turning back.

    The choice has to do with a lot of things, but it would be an uninformed decision without knowing what the weak points of the vehicle are before wading in.

    Some things can be fixed (breathers, sealed raised air intake etc), but others may not be as easily sorted.

    Some are ok as long as you don't stop, others more vulnerable to water coming from specific sides (e.g. stock air intake).

    Either way, learning from the knowledge and/or mistakes of others is a whole lot safer / cheaper than "she'll be right".

    PS: sorry could not help the puns.

  8. #28
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,495
    Total Downloaded
    0
    learn how to hook up a tarp as a wading blanket first up (you'll be surprised at exactly how fast you can do it when you have sorted the correct assembly of occy straps, zip ties, tie downs and tarp mods presorted (including sewing the loose flaps of the tarp if needed so its a preshaped fit.

    ALWAYS walk the crossing first

    remember the 3 golden requirements/rules.

    1. Can the vehicle get me there?
    2. can I get the vehicle there?
    3. do I need to get there?

    A no or Im not sure to any of them should mean you dont do it.

    On a good day, I had putting the wading tarp on on fozzy down to about 15 seconds.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.

  9. #29
    Join Date
    Jul 2008
    Posts
    312
    Total Downloaded
    0
    So you don't get the carpet or your boat shoes wet.
    Seriously though , water pressure pushing is a good point and much over 500mm is starting to push on the body. Land Rover is not going to recommend anything that might be " dangerous " now are they. You cant even say "do so at your own risk" because that in itself suggests that it may not be safe to continue.
    Bit like putting a dog warning sign on your gate, can make you worse off .

    How high is the starter motor ?

  10. #30
    Join Date
    May 2007
    Location
    Safety Bay
    Posts
    8,041
    Total Downloaded
    0
    Quote Originally Posted by camel_landy View Post
    Indeed... People forget just how powerful water is and it doesn't take much to get you into trouble. To put that into context:

    If 1L = 1kg = 10 cm3
    Therefore
    1M3 = 1000L = 1Tonne!!!

    When fording, you can be pushing sever tonne of water... Or have several tonne of water, pushing on the side of the car!!

    They also forget that if the water is deep enough, the car becomes buoyant... Once you reach that point, it only needs the slightest of flow and you're at the mercy of the current. People die, every year due to that one...

    M
    How many times have there been floods in Australia were the news DIDN'T report someone being washed off a road and drowned?. Pat

Page 3 of 7 FirstFirst 12345 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!