Thread: Blackwidow Drawers on a Puma 90

Had my BW's in for almost 6 years. Not a problem and they have carry serious weight across many K's of rough tracks.

I have the drawer, cargo barrier, top shelf and the 12v 60L water tank.

No problem in recommending them.

honestly if you want a drawer for your 90

Go to the department of interior in carlton......they custom make the drawers (you have to leave your car with them for the day because they say that the measurements for the defenders are different between cars) and the one they made for our 110 was VERY good quality!!

$1500 for the one we had made...when we looked at BW it was double that!

http://www.consoles.com.au/

Thanks Drover - that's quite a clear picture of how the drawer works and the little compartment on the RHS. When I attached my 90 with the tape measure, it seems that the drawer leaves about a foot gap where the drawer ends, giving you a bit of space to stick stuff in - which of course, would be accessible to the driver's compartment as it's would be forward of the cargo barrier. Will probably have to get one of those fitted too, but the shelf on it would come in handy.

Dullbird, is Carlton in Victoria?

cheers
Andrew

Carlton Sydney judging by the phone number.

I like how they load test the drawers (see bottom left pic on their website)

Originally Posted by FeatherWeightDriver

Carlton Sydney judging by the phone number.

I like how they load thes the drawers (see bottom left pic on their website)

Unfortunately the BW's don't come pre loaded....

Originally Posted by FeatherWeightDriver

Carlton Sydney judging by the phone number.

I like how they load test the drawers (see bottom left pic on their website)

That's correct Carlton in Sydney.

Originally Posted by Drover

Unfortunately the BW's don't come pre loaded....

Real world conditions would dictate a test load at least three times the weight of that depicted in the photo.

Just found out that the Blackwidow drawer for the 110 won't fit the 90 - consequently, Blackwidow don't make any for the 90 because there isn't enough of a demand to warrant making them. Apparently the dimensions are different in the back. I would have thought that they were the same width etc.

Back to the drawing board!
cheers
Andrew