Puma immobilised. problem solved (Blown fuse)

Good to hear! And welcome.

Have the same problem as described in this thread
20amp fuse for central locking keeps blowing
checked wiring around door pillars as described and one came out in my hand ....it had separated inside the the passenger door

so ......I need to remove the door card to repair this
....I know how to get the window winder off by removing clip ....and the lift up door opener looks to have a retaining screw to remove it .......

.but

not sure how to remove the surround around the push down lock
....and also the pull handle on the door ...this looks like it has two prize off covers which might hide retaining screw ......don't want to start forcing screw drivers in until I know what I'm doing

suggestions appreciated

Correct about the pull handle, the covers are hinged at the outer end and each hide a #3 philips screw.
The lock button surround is a bit of a pig, it's designed to be installed rather than removed. I don't know if there's an official method, but wriggling and prising it upward sort of works.

Quote:

---

Originally Posted by POD

Correct about the pull handle, the covers are hinged at the outer end and each hide a #3 philips screw.
The lock button surround is a bit of a pig, it's designed to be installed rather than removed. I don't know if there's an official method, but wriggling and prising it upward sort of works.

---

Thanks for that