Results 1 to 4 of 4

Thread: '96 130 (300) Defender. Wiper issues.

  1. 12th May 2014, 08:43 AM #1
    Svengali0's Avatar
    Svengali0
    Svengali0 is offline Master Subscriber
    Join Date
    Dec 2010
    Location
    Batemans Bay mostly, and Brisbane
    Posts
    255
    Total Downloaded
    0

    '96 130 (300) Defender. Wiper issues.

    Decided to ask this in new thread rather than hi-jack a similar thread on wiper worm drive issues.

    Any advice?
    Wiper intermittent setting doesn't work. Wiper park does not work (ie, wiper arms stop anywhere on their arc when you turn them off).

    I spoke with a chap at Montrose Victoria (ACJ or whatever his username is on eBay) and he said that TD5's have a 'park switch' on the side of the wiper motor but not 300 Tdi models...

    Anyway- do I need to get another wiper motor or is there a relay that is playing up.

    Not sure how I'm going to get at the wiper motor with all that aircon stuff sitting in front of the panel. Hoping it all unbolts without breaking any of that cheap plastic.
    Any thoughts?
    Reply With Quote Reply With Quote
  2. 12th May 2014, 10:20 AM #2
    86mud's Avatar
    86mud
    86mud is offline Wizard Supporter
    Join Date
    Jan 1970
    Location
    Brisbane
    Posts
    1,652
    Total Downloaded
    0
    Have a look at the wiper arm adapters. They are a little collar that sits on the end of the spindle and the wiper arm connects to these. The little grub screw can come lose allowing play in the wiper arm so it does not do a proper sweep.

    New adapters are only a few dollars, but you might have to drill the old ones out as the grub screw rusts in the adapter.
    Andrew
    1998 Landrover Defender 300Tdi 130 HCPU Expedition
    1972 Peugeot 504 Sedan - Daily Driver
    Reply With Quote Reply With Quote
  3. 12th May 2014, 10:30 AM #3
    Svengali0's Avatar
    Svengali0
    Svengali0 is offline Master Subscriber
    Join Date
    Dec 2010
    Location
    Batemans Bay mostly, and Brisbane
    Posts
    255
    Total Downloaded
    0
    Quote Originally Posted by 86mud View Post
    Have a look at the wiper arm adapters. They are a little collar that sits on the end of the spindle and the wiper arm connects to these. The little grub screw can come lose allowing play in the wiper arm so it does not do a proper sweep.

    New adapters are only a few dollars, but you might have to drill the old ones out as the grub screw rusts in the adapter.
    Thanks for that- I know about how these adaptor things die- I also know that the diecast ones are crap and die not long after install- if the grub screw wasn't destroyed on install.
    This is not that problem though...
    I reckon its something to do with the park switch or a relay...
    Reply With Quote Reply With Quote
  4. 12th May 2014, 12:59 PM #4
    Don 130's Avatar
    Don 130
    Don 130 is offline ChatterBox Supporter
    Join Date
    Oct 2007
    Location
    Wantabadgery, N.S.W.
    Posts
    2,742
    Total Downloaded
    0
    Sounds like your park switch. Access is from the left side of the dash. Remove grab handle and keep digging. You'll find good tutorials by searching the web.
    The switch is not expensive.

    Here's one, but for TD5. I think it won't be that much different for the 300TDI.
    DEFENDER2.NET - View topic - Wipers wont return home

    Don.
    Reply With Quote Reply With Quote
« MY07+ shockies interchangable with MY13 shock absorbers? | Customer Service »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!