-
23rd July 2014, 01:39 PM
#11
1995. So upgrading light loom is a must? bugger, was really hoping for a plug in & drive away system.
-
23rd July 2014, 01:44 PM
#12
No it isn't if you fit LED's,I don't recommend the upgrade anyway.The LED headlights pull alot less amps than halogen,a sparky might chime in but you should fit the LEDs and then fit a pair of LED driving lights directly to the Hi beam circuit so you get Hi beam headlights and a pair of driving lights at the same time.Jaycar have a very good selection of lights and are way cheaper than ARB etc. Pat
-
23rd July 2014, 02:05 PM
#13
I'm really just after lights with a decent low beam. Driving down jungle covered narrow roads at night here is scary with my standard lights. I'm fitting an 18 x 5 watt Great Whites LED light bar, plus 3 x 35 watt Narva HID (2 x spot, 1 x flood). The LED light will be permanently wired into high beam, as will the HIDs, but with a switch.
-
23rd July 2014, 04:45 PM
#14
L322 Range Rovers had two extra lights in the front bumper that were angled 45 degree's to the headlights to light up the area you were turning into,they gave a very wide spread of light and could be used on low or high beam,that might be a solution to your problem. Pat
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks