Page 4 of 5 FirstFirst ... 2345 LastLast
Results 31 to 40 of 43

Thread: Engine chip upgrade and/or intercooler upgrade

  1. #31
    Join Date
    Feb 2010
    Location
    Stellenbosch, Republic of the Western Cape, RSA
    Posts
    662
    Total Downloaded
    0
    Quote Originally Posted by TroyFenda View Post
    ...I decided to start the engine improvements with a simple chip upgrade from Steinbauer. The result is an increase of 25% in kW output and an astounding 35% increase in torque from 381nm to just over 515nm. ...

    this is probably not going to end well... chips = fail

  2. #32
    morphias Guest
    Quote Originally Posted by Naks View Post
    this is probably not going to end well... chips = fail

    I agree...that is a huge increase, especially in torque. All that extra go with no upgrade in intercooler, radiator, pipework, etc.

    Even the guys in the UK doing extreme tuning say ~500nM is the upper limit of that engine before blue printing.

    You'll be blowing up axles, diffs, etc before you know it. Assuming you don't put a rod through the block first...

  3. #33
    Join Date
    May 2013
    Location
    Melbourne
    Posts
    4,842
    Total Downloaded
    0
    Quote Originally Posted by morphias View Post
    I agree...that is a huge increase, especially in torque. All that extra go with no upgrade in intercooler, radiator, pipework, etc.

    Even the guys in the UK doing extreme tuning say ~500nM is the upper limit of that engine before blue printing.

    You'll be blowing up axles, diffs, etc before you know it. Assuming you don't put a rod through the block first...
    Agree 100%.
    I'd be VERY concerned at what's going on inside that engine to produce those sorts of figures with simply a generic chip.
    Pickles.

  4. #34
    TroyFenda Guest
    All very interesting and somewhat helpful to get everyone's varying opinions.

    However, the unfortunate thing is that I've received so many different opinions it's near on impossible to decide what's right and what's wrong. Even qualified diesel mechanics have given contradictory ideas on the matter.

  5. #35
    Tombie Guest
    Diesel mech vs diesel tuner is quite different IME.

    Proceed with great caution with that set up...

  6. #36
    TroyFenda Guest
    For what it's worth the chip was installed by a specialist diesel tuning outfit. The same outfit do engine work and upgrades on 4WDs right the way up to large prime movers, tractors etc.

  7. #37
    Join Date
    Feb 2010
    Location
    Stellenbosch, Republic of the Western Cape, RSA
    Posts
    662
    Total Downloaded
    0
    Quote Originally Posted by TroyFenda View Post
    For what it's worth the chip was installed by a specialist diesel tuning outfit. The same outfit do engine work and upgrades on 4WDs right the way up to large prime movers, tractors etc.

    Troy, the bottom line is that a chip works by intercepting the signals between ECU and engine and then overfuels the engine to produce more power.

    that is a recipe for disaster in the long run, as the engine is now running much hotter. Not to mention the added strain on the drivetrain as others mentioned.

  8. #38
    Join Date
    May 2013
    Location
    Melbourne
    Posts
    4,842
    Total Downloaded
    0
    Yes, I've heard similar things,...ie, that these chips send "false" signals to the ECU, increasing the power of the engine in an "unsafe" manner.
    Pickles.

  9. #39
    AndyG's Avatar
    AndyG is offline YarnMaster Silver Subscriber
    Join Date
    Jan 2014
    Location
    PNG
    Posts
    3,216
    Total Downloaded
    0
    I note that in my RACQ Comp insurance a 3rd party chip = no insurance
    By all means get a Defender. If you get a good one, you'll be happy. If you get a bad one, you'll become a philosopher.
    apologies to Socrates

    Clancy MY15 110 Defender

    Clancy's gone to Queensland Rovering, and we don't know where he are

  10. #40
    Join Date
    Jun 2009
    Location
    Tangambalanga
    Posts
    7,558
    Total Downloaded
    0
    Quote Originally Posted by AndyG View Post
    I note that in my RACQ Comp insurance a 3rd party chip = no insurance
    I wonder if that includes "remapping".

Page 4 of 5 FirstFirst ... 2345 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!