Results 1 to 3 of 3

Thread: Headlight Adjustment

  1. #1
    Join Date
    Jan 2009
    Location
    Kuranda, Far North Queensland
    Posts
    424
    Total Downloaded
    0

    Headlight Adjustment

    I have just replaced the headlights on my 99 TD5 Defender. There are two screws on each that are obviously used for adjustment but unless they are screwed nearly fully in the headlight flops around. Logically there should be a spring on each screw that pushes the headlight forward and then you can adjust the light. Is this right? If so I am missing the springs. If not, how does this work?
    Thanks, Howard

  2. #2
    Join Date
    May 2012
    Location
    Boulder, CO
    Posts
    74
    Total Downloaded
    0
    There are actually two screws with slots near the head. The bezel of the headlight slides into each slot (one on top, the other on the left or right side). Then a third screw secures it all in place. I'll try to snap a pic... As I've just had mine out.

  3. #3
    Join Date
    May 2012
    Location
    Boulder, CO
    Posts
    74
    Total Downloaded
    0
    I hope this shows up ok. The "blade" of the bezel, fits in the slot on the screw head. There are two of those for adjustment, and one in the lower left corner to secure the lamp in place. Pm me if that doesn't make sense.

    uploadfromtaptalk1410833563185.jpg

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!