Tdi Oil pressure switch PRC6387G - What thread?

[Yorkshire_Jon]

Does anyone know what the thread is on a 300Tdi Oil Pressure switch?

Im pretty sure its an imperial thread - It measures 9.66mm and seems to have a pitch of very close to 1.00mm.

Any ideas?

Thx
Jon

[redrovertdi]

on my 300tdi i run a vdo twin post sender that does the idiot light and a pressure gage[vdo 360-006], M10x1k[i dont know what the 1k is]

[Yorkshire_Jon]

Thanks. I can only assume the 1k is 0.001m, or 1mm. Making it an M10x1.00. A 1.00mm pitch.

That would be consistent with what I measured, I just thought it sounded a bit odd!

I think I'll turn a bit up and see if I can make it fit!!

[wrinklearthur]

Thanks. I can only assume the 1k is 0.001m, or 1mm. Making it an M10x1.00. A 1.00mm pitch. -----

That's the thread I looked for when I wanted to fit an adapter to operate both the oil pressure gauge and switch.

In the end I used one for a Volkswagen and it did up without any problems.