Thread: 110 County indicators not working

The first thing I would do is check all your fuses. Your indicators are supplied from different parts of the car like hazard switch and steering column/indicator stalk. Since you said that your hazards make the indicators work then it is probably the supply to your indicator stalk that could be gone.

Check the following things,

Horn
Wiper motor
Washer pump
Stop Lamp
Reverse lamp

Yep, they all work and all fuses are fine, even checked them for continuity with a multimeter. Looks to me like there is no power coming to the indicator part of the stalk. Did a hotwire thing to the power wire on the stalk and the indicators come on when selected but don't flash.

Hi brian, check that hazard switch, the indicators go through it, iirc the harards can still operate if the indicators aren't. I had to bridge 2 of the wires at a hazard switch once to get the indicators working, it was a while back though so can't remember which wire colours, check the indicator wiring for the wire colours?

Jc

As justinc said. These switches are typical Lucas quality.At least when mine failed it fell to pieces so there was no doubt where the fault lay!

John

must be contagious -having my own weird electrical issues today- fortunately the self-repair mechanism seems to have worked!

Originally Posted by Bearman

Looking for a bit of help from the auto leccies here. The other day I hooked up to a trailer that I haven't used for a while. All lights worked except the rh indicator. While I was having a bit of a play to find out why it wasn't working, the ones on the county stopped working. I now have no indicators at all. Hazard lights still work. Checked the indicator flasher relay and fuse, all good but no indicators through stalk. Thought it must be a faulty stalk so changed it out today and still no indicators. Anyone know if there is another fuse or relay somewhere or point me in the right direction

Originally Posted by justinc

Hi brian, check that hazard switch, the indicators go through it, iirc the harards can still operate if the indicators aren't. I had to bridge 2 of the wires at a hazard switch once to get the indicators working, it was a while back though so can't remember which wire colours, check the indicator wiring for the wire colours?

Jc

I think I have a spare new hazard switch somewhere, I will try it tomorrow, Thanks Justin