Any decent builder should be able to assist.
It's essentially the Lintel...
Only a cash situation to rectify
I have recently bought a new house and obviously one of the requirements was that it had a garage high enough to allow my 110 with roof rack to fit. The garage is high enough, however the slope of the drive (down to the garage) means that due to the approach angle I cannot get in with the roof rack on. With it off it fits fine.
The sticking point, for want of a better word is the RSJ that runs across the garage opening. If the beam height (as in the beam itself) was perhaps 50mm lower and therefore the garage opening 50mm higher I would be able to get in.
Has any one got any experience with modifying domestic structures or can any one recommend a firm or engineer who could advise on this.
Regards
John
Any decent builder should be able to assist.
It's essentially the Lintel...
Only a cash situation to rectify
I guess I should have mentioned that the garage is underhouse and therefore the RSJ is holding the house up.
 Master
					
					
						Supporter
					
					
						Master
					
					
						SupporterDriveway material? Is it possible to change the slope? If paved or poured I don't imagine that would be a cheap option
50mm you say...
the house is not the problem, the vehicle is.
central tyre inflation should easily get you an on demand 50mm droop.
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
How much space do you have in front of the house? Is there enough room to put a standalone carport in?
 Wizard
					
					
						Wizard
					
					
                                        
					
					
						As you have said , the lintel " RSJ " is holding the house up , the drive can't be lowered , so that only leaves the vehicle . now that will fit without the roof rack , would a different rack be an option , on that is 50mm lower ? Jim..
| Search AULRO.com ONLY! | Search All the Web! | 
|---|
|  |  | 
Bookmarks