Page 2 of 2 FirstFirst 12
Results 11 to 20 of 20

Thread: Nearly 2 years of searching & researching, finally got a 130!

  1. #11
    PTC Guest
    Quote Originally Posted by Beery View Post
    Advice? Just love it for the big, perfectly imperfect, beast that it is!

    Be careful, they get under your skin
    I could have bought a house by now if i had not gotten into camping and 4wd'ing. They do take a lot out of your pay check. But i would never give up the experiences i have had while away.

    Most of my mates think i am crazy for spending up to $150 a weekend on fuel to sit in the bush. Where as they waste more than that on booze and smokes and don't remember their weekends.

  2. #12
    Join Date
    Jun 2009
    Location
    Townsville
    Posts
    401
    Total Downloaded
    0
    2 weeks to go before I pick up my 2000 Td5 130. Can't bloody wait.

  3. #13
    Join Date
    Aug 2015
    Location
    Brisbane
    Posts
    558
    Total Downloaded
    0
    Quote Originally Posted by PTC View Post
    I could have bought a house by now if i had not gotten into camping and 4wd'ing. They do take a lot out of your pay check. But i would never give up the experiences i have had while away.

    Most of my mates think i am crazy for spending up to $150 a weekend on fuel to sit in the bush. Where as they waste more than that on booze and smokes and don't remember their weekends.

    Yes. I hadn't done it in years until recently, and it was a real life-changing moment to be by a fire in the middle of nowhere, with the Milky Way putting on the best show on earth.

  4. #14
    Join Date
    Mar 2015
    Location
    Canberra
    Posts
    41
    Total Downloaded
    0
    Quote Originally Posted by El Rey View Post
    It's a pity there's not a 360 degree batwing awning from someone like Bundutec. You could open it out once you get home so your rig sat under and had some protection. Condensation wouldn't form at the least.

    On the plus side, there's all manner of portable car covers you could consider - from cheap to expensive.

    https://www.carsolut.com/portable-ga...-pictures-013/

    Performance Car Covers - Bespoke Indoor & Outdoor :: Land/Range Rover :: Land Rover / Range Rover ADVANCED 3 Layer Waterproof & Breathable Outdoor Bespoke Car Cover
    This is a great idea, need to keep the bird poop and sap from the trees above off the big lass too, those tarps are so bleeding expensive though... Considering Colorbond garages are so cheap nowadays.

    Quote Originally Posted by NovaRover View Post
    Congratulations she's a beauty, can I ask what the previous owner used for soundproofing? I'm a builder and I still can't wait to start my 130 each morning to head to site . Can't think of a better way to start the day.
    Cheers mate! He used what seems to be a 10mm foil backed insulating foam, with about 3 or 4mm rubber matting over the top. It's surprisingly quiet inside, the Turbo is the loudest thing in the cabin and I really like the sound of that.
    I'll take some photos of the sound proofing for you.
    Yeah I'm really keen to kit mine out for work. They sure are head-turners, hopefully drum up some attention for the Company!

    Quote Originally Posted by PTC View Post
    I could have bought a house by now if i had not gotten into camping and 4wd'ing. They do take a lot out of your pay check. But i would never give up the experiences i have had while away.

    Most of my mates think i am crazy for spending up to $150 a weekend on fuel to sit in the bush. Where as they waste more than that on booze and smokes and don't remember their weekends.
    That's it, you really can't put a price on exploring our great country. I'll be fortunate enough to claim fuel/repairs/servicing on the Company but yeah years ago I was the same as your mates, now i realise there is a bit more to life. I'm lucky there is some good 4wheeling around Canberra.

  5. #15
    Join Date
    Dec 2008
    Location
    Victoria
    Posts
    1,777
    Total Downloaded
    0
    From experience I can tell you that fitting and removing a car cover becomes very tedious/onerous very quickly. Fitting/removing a car cover to a large car such as a fourby is best accomplished with two people. Doing it solo results in much frustration especially if the cover is wet, covered in frost or it is windy.Doing it in the rain is just a miserable experience. Keeping the inside of the cover dry and free of foreign bodies - dirt, lawn cuttings, moisture etc is also a pain.

    There is also more to a car cover than you might think aka type of material, breathability, lined or unlined.

  6. #16
    Join Date
    Jan 2011
    Location
    Gold Coast
    Posts
    287
    Total Downloaded
    0
    Congrats . Im sure you will enjoy it for a long time. Looks like you found a good one.
    I notice in the picture though that the tray is very low. From the pic it looks like your tyres will hit the tray before your rear diff touches the bump stops. Just thought i would bring this to your attention from experience.
    I bought a 130 with a low tray too and i had all sorts of dramas on my first offroad outing.

    Cheers
    Michael.

  7. #17
    Join Date
    Feb 2008
    Location
    Melbourne
    Posts
    535
    Total Downloaded
    0
    Quote Originally Posted by Bobby D View Post
    Well I must say I'm pretty bloody excited to have acquired her!
    Nice intro Bobby.

    I'm in same boat as you, but with 110. Yours is bigger than mine
    2015 Defender 110

  8. #18
    Join Date
    Mar 2015
    Location
    Canberra
    Posts
    41
    Total Downloaded
    0
    Quote Originally Posted by Pacemaker View Post
    Congrats . Im sure you will enjoy it for a long time. Looks like you found a good one.
    I notice in the picture though that the tray is very low. From the pic it looks like your tyres will hit the tray before your rear diff touches the bump stops. Just thought i would bring this to your attention from experience.
    I bought a 130 with a low tray too and i had all sorts of dramas on my first offroad outing.

    Cheers
    Michael.
    This has crossed my mind. I haven't done any serious off-roading just yet but we will see how it goes. The lower tray is handy however for loading things on and off, which I do everyday for work. I measured the clearance from top of tyre to underside of tray and it's 160mm. Which doesn't seem huge, though from bumpstop to diff it's only 105mm. I'm guessing you had lots of scrubbing on the underside of the tray when you took it offroad?

    Would you think this is enough clearance underneath? I've got Poly airbag assist in the rear coil so I can always pump that up a little more I guess for another few mills. A problem I can foresee in the future though is that when my Baja ATZ's wear out I want to get some taller MT tyres and that will reduce that clearance further.

    From what I can see the tray frame is welded to the chassis so I would assume it would be a decent amount of effort to raise it.

  9. #19
    Join Date
    Jul 2012
    Location
    ferntree gully australia
    Posts
    1,408
    Total Downloaded
    0
    That's a nice looking 130 , I'm sure It will give you lots of pleasure , good luck , and the wave always brings a smile !!.. Jim

  10. #20
    Join Date
    May 2008
    Location
    cairns
    Posts
    269
    Total Downloaded
    0
    Congratulations . you have a ultimate camp rig . to fix the turning circle get someone to turn the wheel while you wind in the steering lock screw on the inside of the hub until the tire is just about to touch the radius arm

Page 2 of 2 FirstFirst 12

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!