Results 1 to 4 of 4

Thread: New puma transfer case

  1. #1
    Join Date
    Oct 2011
    Location
    Burra NSW
    Posts
    933
    Total Downloaded
    0

    New puma transfer case

    I put my puma 130 in for the oil pump recall, and got them to look at the backlash and gearbox rattle,from what I'm told it turns out the gearbox output shaft had significant wear so it was replaced, new rear axles, drive flanges, and they then found copper in the transfer case oil, so I'm getting a brand new transfer case fitted.. I didn't think these boxes gave too much trouble, has anyone had this issue?

  2. #2
    Join Date
    Aug 2006
    Location
    Kingston, Tassie, OZ.
    Posts
    13,728
    Total Downloaded
    0
    Quote Originally Posted by Summiitt View Post
    I put my puma 130 in for the oil pump recall, and got them to look at the backlash and gearbox rattle,from what I'm told it turns out the gearbox output shaft had significant wear so it was replaced, new rear axles, drive flanges, and they then found copper in the transfer case oil, so I'm getting a brand new transfer case fitted.. I didn't think these boxes gave too much trouble, has anyone had this issue?
    never have i replaced/ repaired so many transfer cases (and those poorly fitted unlubricated adapter shafts) in any one model of landrover. Yes i have is the short answer. Likely the one they fitted back in there will also need to be replaced before too long 😠😠😠😠😑😑😑 sorry but the QC department was hiding behind the door when the vehicles were being fitted with these later lt230 cases.

    Jc
    The Isuzu 110. Solid and as dependable as a rock, coming soon with auto box😊
    The Range Rover L322 4.4.TTDV8 ....probably won't bother with the remap..😈

  3. #3
    Join Date
    Oct 2007
    Location
    Brisbane West
    Posts
    7,372
    Total Downloaded
    0
    Hell. Not good. Typically the best part of an LR...

  4. #4
    Join Date
    Jun 2014
    Location
    Dubbo
    Posts
    545
    Total Downloaded
    0
    Quote Originally Posted by justinc View Post
    never have i replaced/ repaired so many transfer cases (and those poorly fitted unlubricated adapter shafts) in any one model of landrover. Yes i have is the short answer. Likely the one they fitted back in there will also need to be replaced before too long 😠😠😠😠😑😑😑 sorry but the QC department was hiding behind the door when the vehicles were being fitted with these later lt230 cases.

    Jc
    What's your preferred solution Justin? One rebuilt by Ashcroft? Extended sump for cooling?

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!