Results 1 to 3 of 3

Thread: TD5 EU2 Defender map for NNN5000020 ECU

  1. 30th October 2015, 06:01 PM #1
    JoeFriend
    JoeFriend is offline Master
    Join Date
    Apr 2015
    Location
    Bondi Junction
    Posts
    362
    Total Downloaded
    0

    TD5 EU2 Defender map for NNN5000020 ECU

    Hi guys

    I just bought an ECU off a forum member (thanks dodgy).

    I need to give it a bit of a clean (previous car has had oil in the harness) before I install. There is plenty of info on how to install it and change setting etc.

    I will however need a default map for it, does anyone know where to get a standard one from? I want to make sure it all runs etc before I get a remap done, and it came out of an EU3 D2a which from what I can tell won't work.

    Any help would be greatly appreciated.

    Joe
    Reply With Quote Reply With Quote
  2. 30th October 2015, 06:55 PM #2
    lambrover's Avatar
    lambrover
    lambrover is offline Wizard
    Join Date
    Jan 2008
    Location
    Sydney, West
    Posts
    1,241
    Total Downloaded
    0
    You need a Nanocom or similar to read the file. You will also need to get the injector numbers. The Nanocom or similar scan tool should read them but I double checked by removing the rocker cover anyway and wrote the numbers down. I bought a second hand ECU of Triumph Rover Spares in Vic with a remap to suit. I just had to load in the injector numbers from memory. If I was doing it again however I wouldn't go with Triumph Rover Spares, I asked and they advised not to adjust the boost. I found this odd but didn't do it as they advised not to. I warped a exhaust manifold.

    To me this means they don't fully understand what they are doing, I would go with Davis Performance if I was to do it again. I have had a bit to do with them over the last couple of years on different land rovers and they are really good.
    Reply With Quote Reply With Quote
  3. 30th October 2015, 10:01 PM #3
    JoeFriend
    JoeFriend is offline Master
    Join Date
    Apr 2015
    Location
    Bondi Junction
    Posts
    362
    Total Downloaded
    0
    I have a nanocom, I just want the base map for my car, I think I know the other points you mentioned. If you have a base map or know of where I can get one let.Mr.know!

    Sent from my SM-G900I using AULRO mobile app
    Reply With Quote Reply With Quote
« Bulkhead OUTRIGGERS | Using synthetic oil 2.5 Petrol? »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!