Results 1 to 4 of 4

Thread: p/n for puma discs and brake pads

  1. 9th December 2015, 09:42 PM #1
    muddy's Avatar
    muddy
    muddy is offline Master Silver Subscriber
    Join Date
    Jan 1970
    Location
    Gold Coast Hinterland
    Posts
    566
    Total Downloaded
    0

    p/n for puma discs and brake pads

    Could some one please supply the p/n for front and rear discs and the tolerances for machining
    Also the p/n for front and rear brake pads

    thanks Maurice
    Reply With Quote Reply With Quote
  2. 9th December 2015, 10:06 PM #2
    ozy013's Avatar
    ozy013
    ozy013 is offline Master
    Join Date
    Jan 2011
    Location
    Caroline Springs, Vic.
    Posts
    337
    Total Downloaded
    0
    Rotors

    Front. Non ventilated; FRC7329, now supercedes to LR017951
    Ventilated ; FTC902, now supercedes to LR017952

    Rear. 90; LR017953
    110/130; LR018026


    Pads

    Front; SFP000260
    Rear ;SFP00270, used to be STC8574

    Front disc thickness, 90; 14.1mm, 110/130; 24mm. Wear limit 1mm per side, run out 0.15mm.
    Rear disc thickness, 90; 12.5mm, 110/130; 14.1mm. Wear limit, 90 0.38 per side, 110/130 1mm per side. Run out max 0.15
    Last edited by ozy013; 9th December 2015 at 10:19 PM. Reason: Not finished.......yet
    Reply With Quote Reply With Quote
  3. 10th December 2015, 09:28 AM #3
    Chops's Avatar
    Chops
    Chops is offline OldBushie
    Join Date
    Jun 2009
    Location
    Tangambalanga
    Posts
    7,558
    Total Downloaded
    0
    Maurice, I ended up putting slotted rotors on mine, they work really well, really really well, especially considering I don't have ABS.
    Got them off the net basically through a mate of mine hear in Melbourne.
    Can't help you with the part numbers etc, but looks like Ozy's got that covered, but there are picks and I think the name of them on my build thread if your interested.
    Reply With Quote Reply With Quote
  4. 10th December 2015, 11:24 PM #4
    muddy's Avatar
    muddy
    muddy is offline Master Silver Subscriber
    Join Date
    Jan 1970
    Location
    Gold Coast Hinterland
    Posts
    566
    Total Downloaded
    0
    thanks Ian checking if mine can be machined or if new ones need to be purchased

    Marcus great info will follow up if I can't machine existing ones
    Reply With Quote Reply With Quote
« Defender td5 compressor location ideas | Puma auto conversion »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!