Does the pump work / make a whirring noise when button is depressed?
Plan B Might be remove centre stereo surround and check that the plug is connected.
Failing that, if it's brand new, make it the dealer's problem.
Hi All
2000km up on my new 90 & loving life. From day one though I noticed that the rear wiper / washer does not work - today I checked the fuses & yes all in order. I noticed last night that the rear wiper / washer buttons were not illuminated with the rest of the dash & other buttons - any advice here most appreciated.
Thanks in advance
Glen
Does the pump work / make a whirring noise when button is depressed?
Plan B Might be remove centre stereo surround and check that the plug is connected.
Failing that, if it's brand new, make it the dealer's problem.
-Mitch
'El Burro' 2012 Defender 90.
No sounds at all Mitch - i suspect something is simply unplugged
Could (should!) be a simple matter of undoing the 4x torx screws and gently jimmying the surround off about an inch up from the bottom corners, and about an inch below where it angles back into the dash. You'll feel the clips. Gently remove. From there a 5 second look at the back of the button should give you a good idea if it's the plug!
-Mitch
'El Burro' 2012 Defender 90.
I must be going blind Mitch - can easily see 1 each side of the heating / cooling dials - where are the other two?
Oh & thanks again for your help��
Oh sorry. I must have had a premature seniors moment.
Looks like it's only 2 screws! IIRC they are about T30 torx
Google image:
If you have a set of trim removal tools they are the best i've found for ease of use, and not damaging the vehicle. I used to use screwdrivers and anything else I could get my grubby hands on, but I've since seen the light. About 15 bucks from supersheap.
-Mitch
'El Burro' 2012 Defender 90.
Thanks for the advice Mitch - will track down that trim removal kit & see what's doing on the weekend.
| Search AULRO.com ONLY! | Search All the Web! | 
|---|
|  |  | 
Bookmarks