Results 1 to 4 of 4

Thread: Tools for a belt change

  1. 16th June 2016, 06:41 PM #1
    fatcat
    fatcat is offline Master
    Join Date
    Jan 1970
    Location
    briz
    Posts
    270
    Total Downloaded
    0

    Tools for a belt change

    Hi Guys,

    What tools do i need to change fan belt on a 2002 TD5 Defender.

    Do i need to remove the viscous fan and use a 36mm spanner


    one week 2 days till we leave for the Simpson

    Thanks
    Reply With Quote Reply With Quote
  2. 16th June 2016, 07:25 PM #2
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,495
    Total Downloaded
    0
    couple of screw drivers to get the shroud off and then a combo 14/15mm double off set or long throw single offset ring/ring spanner to lift the tensioner. (its usually a #2 phillips but some people put other things in.)

    then swearwords.

    a piece of cardboard and a fan hub spanner to remove the viscus fan makes it a lot easier. but you're still likely to swear at it.

    check, double and triple check the pully barings for the fan while the belts off.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  3. 16th June 2016, 07:55 PM #3
    fatcat
    fatcat is offline Master
    Join Date
    Jan 1970
    Location
    briz
    Posts
    270
    Total Downloaded
    0
    Thanks Blknight.aus,

    What size hub spanner, going to Bunnings tomorrow will they have them

    thanks
    Reply With Quote Reply With Quote
  4. 16th June 2016, 08:15 PM #4
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,495
    Total Downloaded
    0
    no bunnings wont.

    Ive got the combo 32/36mm one one side or theother fits most landy fans.

    you can variously get them from supercheap repco and trade tool shops
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
« Rear 130 Seats | Bridgestone 661 »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!