Results 1 to 7 of 7

Thread: I/C hose failure on the pussycat

  1. #1
    Join Date
    Dec 2006
    Location
    Torres Straits
    Posts
    3,503
    Total Downloaded
    0

    I/C hose failure on the pussycat

    I know it's a known and it's boring but I'm waiting for a delayed plane and bored

    Few weeks ago driving to Cairns to fly off to Kimberleys place to catch Barra I had an induction pressure reduction failure ... or "whoosh event"

    Anyway limped it a couple of hundred to Cairns got my flight caught Barra and came back to Qld. A good mate in Cairns tried to fix it with rescue tape as I had a pair of BAS hoses at home so no point replacing it temporarily. Rescue tape failed in less than a km so I limped her 330km home. Fuel burn on the 2.4 is amazing if you keep boost down below 9psi above atmo!

    Anyway too many words

    First is the hole on the hairdryer to I/C hose rubbed on steering Uni fault

    S
    Attached Images Attached Images
    '95 130 dual cab fender (gone to a better universe)
    '10 130 dual cab fender (getting to know it's neurons)

  2. #2
    Join Date
    Dec 2006
    Location
    Torres Straits
    Posts
    3,503
    Total Downloaded
    0
    And next is a compression comparison between aged tired and failed OEM hose and BAS replacement

    Picture - thousand words - blah blah blah

    S
    Attached Images Attached Images
    '95 130 dual cab fender (gone to a better universe)
    '10 130 dual cab fender (getting to know it's neurons)

  3. #3
    Join Date
    Jan 2016
    Location
    Tolga FNQ
    Posts
    1,002
    Total Downloaded
    0
    Hmm, timely.
    I just ordered a set of silicone IC hoses from BAS.
    I'll change them out ASAP.
    Ken

  4. #4
    Join Date
    Aug 2006
    Location
    Kingston, Tassie, OZ.
    Posts
    13,728
    Total Downloaded
    0
    Looks like you're doing some work on the landy those are nice dirty hands...😅

    Jc
    The Isuzu 110. Solid and as dependable as a rock, coming soon with auto box😊
    The Range Rover L322 4.4.TTDV8 ....probably won't bother with the remap..😈

  5. #5
    Join Date
    Dec 2006
    Location
    Torres Straits
    Posts
    3,503
    Total Downloaded
    0
    No JC those are simply my hand model hands used for high quality purdy pickchas

    Haven't done much on this new fangled fender but I know this .... my old 1/2" bolt twisters will turn to iron oxide at this rate ....

    Entire engine bay is 1/4" country with a sprinkle of 3/8th

    S
    '95 130 dual cab fender (gone to a better universe)
    '10 130 dual cab fender (getting to know it's neurons)

  6. #6
    Tombie Guest
    Don't forget to trim the new hose!

  7. #7
    Join Date
    Dec 2006
    Location
    Torres Straits
    Posts
    3,503
    Total Downloaded
    0
    Done at install

    S
    '95 130 dual cab fender (gone to a better universe)
    '10 130 dual cab fender (getting to know it's neurons)

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!