Thread: Puma interior - top door seal, seat recline handle and door lock knob surround

I am going around and fixing up some of the minor imperfections on our 2011 Puma 90. Have a few dodgy bits in the interior which I'm seeking a bit of advise on:

1. The passenger side door lock knob surround slides upwards. It can be pushed back down but fairly quickly will be back up following a few door unlocks and locks. Any reason I can't put a dab of glue to help secure it in it's correct place?




2. The drivers side top door seal keeps drooping down. Can be pushed back up to it's correct place but within a few door openings and closings it will be back hanging. Any reason I can't put a dab of glue to help secure it in it's correct place?




3. When I got the vehicle the recline knobs were missing on both the front seats. I have purchased and fitted replacements, but are these a common item to knock off? Any reason I can't put a dab of glue to help secure it in it's correct place?

Mine has this issue with the rear passenger door lock knob surround sliding upwards - when I took it in for the first service I pointed out that the door trim (on that door) was not attached to the door correctly and they are 'ordering parts' to fix it - my assumption this will also fix the door lock surround - albeit this is not a issue that bothers me too much.

Originally Posted by twr7cx

1. The passenger side door lock knob surround slides upwards. It can be pushed back down but fairly quickly will be back up following a few door unlocks and locks. Any reason I can't put a dab of glue to help secure it in it's correct place?