
Originally Posted by
DazzaTD5
Its something that I check pretty carefully when fitting a snorkel, removing the plastic tube, fitting nugget stuff tube.... that its all correctly sealed, generally its all pretty good...
*I'd find it difficult to believe that much water could get down the top of the snorkel, but stranger things have happened.
*The most obvious thing is the top of the airbox has been fitted incorrectly, which is a very common thing when people dont take enough care (you know, one of them Land Rover jobs that should be simple but people balls it up).
*I see from the OP pic the a/c line has the typical munched marks on it from people forcing the airbox lid past the line.
*When fitting the airbox lid, you push the a/c line down as you position the lid, this allows the hooks on the lid to line up and engage into the slots thus then allowing the lid to seat correctly.
*If the airbox lid is forced and it doesnt seat correctly AND OR when its forced it take out two chunks off the air filter seal, I can then believe that with enough rain pouring down onto the top of the wing it runs down onto and into the airbox.
Regards
Daz
Bookmarks