Thread: metal binnacle mount

I should point out too, with the raised dash, the dash pad will need to be cut out to allow any more than 30mm depth for gauges in the top section, easy enough to replace a dash pad if need to in the future, but from my experience once you fit something like this it’s pretty rare that it will be removed.

Originally Posted by rijidij

I should point out too, with the raised dash, the dash pad will need to be cut out to allow any more than 30mm depth for gauges in the top section, easy enough to replace a dash pad if need to in the future, but from my experience once you fit something like this it’s pretty rare that it will be removed.

I'll be very interested in it once you get it to 'export' stage!

Ditto. I'd like one, even as a 'beta user'.

How much was the raptor unit and did you source locally or sent from UK?

Originally Posted by Svengali0

I bought the raptor binnacle and mount...expensive..but now i can get in there if needed without the plastic garbage cracking and breaking up. I'd recommend doing both binnacle and mount. Easy to fit as well.

Any particular reason why did you opt for the raptor over the APT unit?

Originally Posted by weeds

I looked at the APT but went the fill raptor solution.

I see Rijidij is also developing a solution.

Originally Posted by mattmac

Any particular reason why did you opt for the raptor over the APT unit?

From memory APT I don’t think o was a ware of APT....plus I also want to fit a double din centre dash so figured raptor so it all looked the same

Resurrecting thread. Was there any progression with these? Our plastic dash is damaged so looking at options.

Originally Posted by CraigE

Resurrecting thread. Was there any progression with these? Our plastic dash is damaged so looking at options.

They’re not on my website, but I have some on EBay

Land Rover Defender Tdi, TD5, Perentie, County Metal Dash Replacement | eBay

Let me know if you need any more info.

Cheers Murray