Results 1 to 3 of 3

Thread: Puma 2.2 warning lights

  1. #1
    Join Date
    Nov 2014
    Location
    Brisbane
    Posts
    91
    Total Downloaded
    0

    Puma 2.2 warning lights

    Hi All,

    Today, I had a problem....

    After I had driven the landy for 5 mins, stopped and restored, came up with engine warning light and the TCS(?) warning light. These stayed on for the next 3 or 4 short trips in the car, 1/2 an hour or so, then have gone out.

    Once I got home connected Nanocom, only 3 "tested" faults showing, 2 were invalid data and 1 was throttle position fault. Don't think these are related to the issue. Too many "untested" faults for the Nanocom to load. Was expecting to see a wheel sensor fault, did not see this.

    Any ideas?

    Mark

  2. #2
    Join Date
    Aug 2006
    Location
    Kingston, Tassie, OZ.
    Posts
    13,728
    Total Downloaded
    0
    Check battery voltages and earth connections. There are 2 small earth wires on drivers side of the transfer case that csn cause havoc if they aren't tight too.
    The Isuzu 110. Solid and as dependable as a rock, coming soon with auto box😊
    The Range Rover L322 4.4.TTDV8 ....probably won't bother with the remap..😈

  3. #3
    Join Date
    Nov 2014
    Location
    Brisbane
    Posts
    91
    Total Downloaded
    0
    Thanks Justin

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!