Thread: MY99 Td5 Indicators Not Working

Hi all, I've got a Td5 110 (MY99), the indicators and hazards have stopped working. Everything else is working fine.

I've checked.....
- ALL fuses OK in the fuse box in front of the gear stick AND all OK in the fuse box under the driver's seat.
- ALL relays OK, in case they affect circuits for the indicators / hazards.
- ALL indicator globes OK.
- No obvious wiring shorts (but could have a hidden short somewhere?).
- Replaced the indicator flasher unit behind the fuse box with a new flasher unit but no change.
- High Beam and Horn have power at the indicator switch(on the steering column stalk)and work fine .

I don't have a multi-meter. I've run out of options to find the solution.
Be nice to get the indicators working again without taking the Deefa to an auto elec.
Any suggestions what else I can check?

Originally Posted by greenextreme

Problem solved.
Followed the steps on this link and isolated a faulty hazard switch.
Hazard Switch & Indicators - fault diagnosis - Defender Forum - LR4x4 - The Land Rover Forum
Bridged the light switch to flasher supply and got the indicators working until I get a new switch.
Thanks

Thanks greenextreme - pulled the hazard light switch out and put it back in (that's all) and presto - blinkers are working again (but not the hazard lights or rear demister - but they're luxury items anyway)