- 
	
		
                        
                                
                                        
                                                24th December 2019, 10:55 AM
                                        
                                
                                
                                        
                                                #1
                                        
                                        
                                        
                                
                        
		 
 
		
		
		
		
			Could use some suggestions on a leak remedy
		
 
			
				
					Merry Christmas everyone,
 
 I have  a ongoing leak from the watch glass on my Allisport coolant reservoir (photos attached). This is the second time around dealing with leak.  Both times the clear perspex develops small hairline cracks and the coolant seeps around the edges of the perspex and through the bolt holes.
 I have pulled it apart numerous times and RTV silicone sealed all around.  The perspex just doesn't seem to be up to handling the heat and/or the thermal expansion and contraction.
 
 I now turn it over to you, what should I try next?  Different sealant?  Tempered glass? etc......
 
 Thanks again,
 Photo 24-12-19, 10 22 04 am.jpgPhoto 24-12-19, 10 22 13 am.jpg
 
 
 
 
 
 
- 
	
		
                        
                                
                                        
                                                24th December 2019, 04:43 PM
                                        
                                
                                
                                        
                                                #2
                                        
                                        
                                        
                                
                        
		 
 
		
		
		
				
				
		
			
				
					My suggestion is to go to a Perspex distributor and discuss what options they have which may suit your needs.  From my understanding not all Perspex is the same.  With a bit of luck they may have an off cut.  May also be worth advising what coolant your running as it may be the cause of your issue.  Worst case perhaps go to Glass .
				 
 
 
 
 
 
- 
	
		
                        
                                
                                        
                                                24th December 2019, 06:51 PM
                                        
                                
                                
                                        
                                                #3
                                        
                                        
                                        
                                
                        
		 
 
		
		
		
				
				
		
			
				
					I’ve got one of these waiting to go in when Iveco get the new cap in I want to use. 
 I note Allisport have mentioned a revised sight glass as part of current offerings, have you been in contact with them?
 RTV I expect will not work with 15psi in the cooling system.
 
 
 
 
 
 
- 
	
		
                        
                                
                                        
                                                24th December 2019, 07:44 PM
                                        
                                
                                
                                        
                                                #4
                                        
                                        
                                        
                                
                        
		 
 
		
		
		
				
				
		
			
				
					You could go see a glass cutter and get some Borosilicate glass cut to suit.
				 
 
 
 
 
 
- 
	
		
                        
                                
                                        
                                                27th December 2019, 01:46 PM
                                        
                                
                                
                                        
                                                #5
                                        
                                        
                                        
                                
                        
		 
 
		
		
		
				
				
		
			
				
					Thank you all!
 
 I have sent an email to Allisport, and considering the Christmas holiday, figure I will wait a bit to see what they say/recommend.
 Short of Allisport having an answer, I will stop by a perspex/ glass place to find out what they recommend.
 
 Cheers,
 Taylor
 
 
 
 
 
 
- 
	
		
                        
                                
                                        
                                                27th December 2019, 04:07 PM
                                        
                                
                                
                                        
                                                #6
                                        
                                        
                                        
                                
                        
		 
 
		
		
		
				
				
		
			
				
					Just fitted one to my Td5 a couple of months ago no leaks, it appears to have glass not perspex. Keep on to Allisport to send you new glass.  
 
 
 
 
 
 
- 
	
		
                        
                                
                                        
                                                30th December 2019, 05:03 AM
                                        
                                
                                
                                        
                                                #7
                                        
                                        
                                        
                                
                        
		 
 
		
		
		
				
				
					
				
		
			
				
					Thanks DiscoFender, will do.  I'm sure their away for the Christmas break, but waiting for them to reply to my original email on this.
 
 Cheers,
 
 
 
 
 
 
 
	
	
	
	
	
	
	
	
	
	
	
	Tags for this Thread
	
	
	
		
		
		
		
			
				 Posting Permissions
				Posting Permissions
			
			
				
	
		- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-  
Forum Rules
 
			 
		 
	 
 
  
    | Search AULRO.com ONLY! 
 | Search All the Web! 
 | 
  
  
  
Bookmarks