Thread: Puma factory radio

Ive got one Im willing to part with out of my 2012 130 Puma
Complete with code and aerial adaptor

PM sent

Originally Posted by Grappler

Ive got one Im willing to part with out of my 2012 130 Puma
Complete with code and aerial adaptor

PM sent

Thanks Grappler, unfortunately my mailbox was full so I didn’t receive your PM. Have cleared it now so if you could resend that would be great!

Cheers - Simon

I also have but looks if you are ok. I took mine out due to a crappy land rover radio I put a Kenwood in its' place and I get much better reception when the original would not work.
Lindsay

Originally Posted by oldyella 76

I also have but looks if you are ok. I took mine out due to a crappy land rover radio I put a Kenwood in its' place and I get much better reception when the original would not work.
Lindsay

Thanks Lindsay

Yup all sorted now ;-)

Cheers Simon

Ok I have my ‘new’ 2012 Puma radio and looked at installing it this morning in the Td5.

Unsurprisingly the plugs are quite different.

Am sure I read somewhere on here that there is an adapter cable that will fix the problem available from one of the regular accessory outlets...

Standard Td5 plug



New 2012 Puma plug...




And this cable was in the box...




Has anyone had experience swapping these units? Is there an adapter available off the shelf, or do I need a trip to my local sparkie?

Thanks in advance.

Cheers Simon

I'd start with a call to your nearest car sound place, they usually have an extensive catalogue of the things.
I've used my local Car Sound a couple of times. You will need to give them the make, model and part number of the old and new units.


Cheers Glen

Aerpro seem to make most of the adapter cables that are available - Link to site Landrover Defender 2007-2015 | Aerpro

The factory cable on the later Pumas is a native cable to suit Alpine headunits and looks like the white plug on this cable Alpine CDE-133EBT | Aerpro

If the adapter cable above fits you are good. The Aerpro site says that the cable in the second link works for a range of Landrovers with single DIN radios such as Disco 2 and Freelander as well as Defenders

The other way to fix it would be to splice the connector that comes with the radio into the TD5 harness which should not be too difficult.


Regards,
Tote

Originally Posted by Tote

Aerpro seem to make most of the adapter cables that are available - Link to site Landrover Defender 2007-2015 | Aerpro

The factory cable on the later Pumas is a native cable to suit Alpine headunits and looks like the white plug on this cable Alpine CDE-133EBT | Aerpro

If the adapter cable above fits you are good. The Aerpro site says that the cable in the second link works for a range of Landrovers with single DIN radios such as Disco 2 and Freelander as well as Defenders

The other way to fix it would be to splice the connector that comes with the radio into the TD5 harness which should not be too difficult.


Regards,
Tote

Thanks Tote

I was looking at those in Supercheap yesterday, but they had a pretty limited range. I called my local auto sparkie and it was all a little hard for him, he wanted to see circuit diagrams but I can find any for the Puma.

Cheers - Simon