How is the connector at the back of the bulb.
Maybe the new bulb is Kaput. Switch them over and see if it changes.
Regards PhilipA
Hi All,
looking for some help with Puma high beam issue. Both low beams work, passenger high beam works, drivers side doesn't.
I have changed globes and changed the fuses, but no joy.
Has anyone had similar issues and suggest where to start hunting down the problem?
thanks.
 Swaggie
					
					
						Subscriber
					
					
						Swaggie
					
					
						SubscriberHow is the connector at the back of the bulb.
Maybe the new bulb is Kaput. Switch them over and see if it changes.
Regards PhilipA
Check the fuse connection at the back of the fuse holder, I’ve had one burn out before
1985 110 Dual Cab 4.6 R380 ARB Lockers (currently NIS due to roof kissing road)
1985 110 Station Wagon 3.5 LT85 (unmolested blank canvas)
Have your done a wiring upgrade?
I had the same issue, I have the wiring upgrade and found it was a relay. (I have 4 relays) one for each high and low beam.
I’d check the plug with a multi meter to see if you have any juice coming through. I know you have changed globes but at least this way you can be 100% sure that it is before the globe.
| Search AULRO.com ONLY! | Search All the Web! | 
|---|
|  |  | 
Bookmarks