Thread: Pedal rubbers

Had you asked last week, I'd have measured some whilst at KLR Automotive. I have to go there on 10th Jan to pick up a microphone for my 2m/7cm ham rig.

They also had pedal rubbers for series Landies (they have tabs which bend under the metal footpad). I know because I picked up a pair and asked what they were for.

Pics from Little Green Landy:

img_1989.jpg

img_1990.jpg

Originally Posted by p38arover

Had you asked last week, I'd have measured some whilst at KLR Automotive. I have to go there on 10th Jan to pick up a microphone for my 2m/7cm ham rig.

They also had pedal rubbers for series Landies (they have tabs which bend under the metal footpad). I know because I picked up a pair and asked what they were for.

Pics from Little Green Landy:

img_1989.jpg

img_1990.jpg

Thanks Ron. I looked at the ones on my SIII, and thought that they might work. I can't see that the pedals on a Deefer would differ greatly in size. I would prefer the type that moulds over the pedal if I can get them.

The OKA is such a mishmash of bits and pieces it's quite possible they'll fit.

I am in no tearing hurry, so if you could measure some Deefer ones I'd appreciate it. I suppose the trick now is getting you to remember...

Was just in the shed and checked the Perentie, 70mm x 75mm approximately

Puma and TDI 7cm wide and 7.5 cm length.

Originally Posted by Tins

Does anyone know the dimensions of Deefer brake pedal rubbers? My OKA has pads that are 1100x1005x15 external.

Wow, when you say external, I think they'd have to be..... you'd struggle to get them inside the footwells.

Originally Posted by discorevy

Wow, when you say external, I think they'd have to be..... you'd struggle to get them inside the footwells.

Nah, have you ever seen an OKA??



*All measurements are in micrometers, except the 15 one

Originally Posted by Tins

Nah, have you ever seen an OKA??



*All measurements are in micrometers, except the 15 one

Worked on them and Drove them when I lived in Broome.
My Workshop looked after them for various tour companies in the early 2000's

So the measurements converted to mm from micrometres are 1.1mm X 1.005mm X 15, surely you could fab something up..... under a microscope