County seats.

Have a fossick through the spares here. You might get lucky. There were some Perentie seats in the last auction

Don.

Quote:

---

Originally Posted by p38arover

Re lift up door handles, do Perentie 4x4 fit? (Not 6x6 which appear to be Defender push button doors.)

---

no as the 4x4 Perentie has the lift up handle on both sides of the door, early 110 (civilian or county) have the lift up handle on the outside only.
6x6 have later Defender doors.

nobody from what I have searched (for many a year) make the early 110 lift up handle on the outside lock.
SP in the u.k make the early doors but not the lock assembly.

Finding and fitting Defender seats in any form be they early Defender (200, 300, td5) or later (TDCi, puma) are readily available world wide both as new or used.

Perentie seats use the bolt holes in line with Defender, as noted, one bolt hole on each corner.
As mentioned I fitted later TDCi Defender seats to my Perentie and they bolted straight up.

So fitting Perentie seats to a early 110 (again, with the already mentioned 2 bolt holes on each corner) will require new holes and mounting plates.
So working on that I would rather any Defender seats over Perentie seats which are grossly expensive to buy and refurb.

**of course the big question for the OP... Is their 110 County an early 2 bolt hole or a later single bolt hole?

if it was me i'd just get a pair of any Defender seats with bases, re-drill the holes and plates if the 110 is an early one and if asked where are the seats from simply say they are standard Land Rover 110/Defender seats.

there wont be any adr on the individual items that came from the factory. your VIN plate simply says that the vehicle was manufactured to adr compliance.

Talk to the guys at TR Spares, I got a replacement seat for my defender off them - about $700 and it's in very good nick. You will struggle to find anything cheaper that's any good, I looked for years.