Thread: County dash doing my head in.

Originally Posted by riverrat

I felt like smashing the whole dash today

Rich

i know the feeling

Removing the factory aircon and freeing up the front vents is usually the first county mod made. There are a heap of previous topcs on here if you run through a search on 'vents'. It does require some fiddly work with spot welds though.

Hehehe...

Maybe just put in a dash pod or roof console?

It isn't difficult to make your own as long as you measure everything properly and take it slowly and carefully.

You could make it out of MDF or fiberglass (if you can work 'glass) and then cover it in vinyl?

Good luck regardless!

I've been there

I am just going to change the whole firewall, dash & heater unit to a non-aircon unit, with opening vents and a standard heater. A huge pain, but worth it in the end.

My air vents are sealed up & I have a modded dash, so I installed an air blower from an old Patrol. You could look at a similar setup using, maybe a smiths heater??
http://www.aulro.com/afvb/projects-t...ct-county.html

I wonder how long before someone wants to fit vents to a 2007/8 Defender?

John

I'm in the process of fitting a county AC to my non AC county. If you live in a hot part of the country like I do (Scone) on go 4x4ing you can open the vents and windows turn the fan on it still gets bloody hot in the cab! The dash boards can be frustrating but they do come apart ok if you take a little time to find the screws. The AC's in the countys have always been know not to work very well but a few changes makes a huge difference. The main one is through away the harrison compressor and put a new sanden compressor on it. Use the brackets of a Disco (if it's a V8) and it all bolts up. A snorkel off a 200tdi and a little pipe work gets you fresh are into the cab without the fan going. The vents just give you another water leak to fix!

1985 4.4EFI V8 Extra Cab County