Results 1 to 8 of 8

Thread: Puma oil

  1. #1
    WMFD Guest

    Puma oil

    After recently purchasing a new 130 I noticed the oil turned black after at about 4000K, its like most of the Jap oilburners that turn the oil black soon after a change. After owning a TD5 130 previously the oil was relatively clean at 10 000 K when I used to change it.

    To me the sign of a good diesel engine is one that doesnt soot the oil up so quick. I am farming and most of the farm machinery we have the oil is relatively clean at changes.

    So is this a concern for the little 2.4 (Dealer doesn't think so!) or is it just the Ford influence? and I should just forget about it!

  2. #2
    Join Date
    Aug 2006
    Location
    WA
    Posts
    13,786
    Total Downloaded
    0
    The oil has absolutely nothing to do with soot levels. Soot is formed during combustion, coats the cylinder walls, and ends up in the oil.

    The TD5 has a MANN+HUMMEL oil centrifuge fitted as standard, which removes a lot of the soot. This is probably the reason the oil stays clean. Your farm equipment probably also has bypass filters or centrifuges fitted.

  3. #3
    Join Date
    Jan 1970
    Location
    Padstow NSW
    Posts
    4,501
    Total Downloaded
    0
    sounds like you need a provent?

    cheers phil

    ps...its a ford motor......

  4. #4
    dmdigital's Avatar
    dmdigital is offline OldBushie Vendor

    Gold Subscriber
    Join Date
    Jun 2006
    Location
    Arnhem Land, NT
    Posts
    8,492
    Total Downloaded
    0
    Mine did the same at 4200km, I did an oil change at about 5000km as I'd been towing a trailer for most of that. Didn't worry me and its clean after the oil change.
    MY15 Discovery 4 SE SDV6

    Past: 97 D1 Tdi, 03 D2a Td5, 08 Kimberley Kamper, 08 Defender 110 TDCi, 99 Defender 110 300Tdi[/SIZE]

  5. #5
    Join Date
    Jan 1970
    Location
    Brisbane
    Posts
    5,458
    Total Downloaded
    0
    The td5 actually looks after it's oil very well. It's one of the few diesels around in this size with a centrifugal filter. If you're worried about it the only real way to check is get an oil analysis done. Also, maybe changing half way would be a good idea.
     2005 Defender 110 

  6. #6
    Join Date
    Aug 2006
    Location
    WA
    Posts
    13,786
    Total Downloaded
    0
    Quote Originally Posted by discowhite View Post
    sounds like you need a provent?

    cheers phil

    ps...its a ford motor......
    Actually, a provent doesn't do much about soot - instead it keeps the oil in your engine (sump), instead of in your intercooler, turbo, or air intake.

  7. #7
    WMFD Guest
    Thanks for that maybe I will change oil at 5000K and we will see what happens next time

  8. #8
    Join Date
    Jan 1970
    Location
    Melbourne, Australia
    Posts
    557
    Total Downloaded
    0
    My understanding of diesel engine oils is that they have high detergent additives compared to petrol engine oils. So the fact that the oil is holding the soot is probably better than if the soot is still clinging on to the insides of the engine.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!