Thread: 130...braking effects indicator ??

you should try looking at the connectors on the indicators to loom section, ensure they are not corroded making a poor earth.
If it turns out to be the case just change them out for new parts.
i hope that helps lardy !

thanks mate,
I did what you suggested, and sure enough it was a connector that had corroded, i changed it out and what do you know it works fine thanks for your input lardy

That's not your only problem.

You've started talking to yourself.

And even worse your getting answers

CC

Originally Posted by Col.Coleman

That's not your only problem.

You've started talking to yourself.

And even worse your getting answers

CC

when i flick my indicator the trailer symbol flashes aswell???? any ideas? or same as above

Originally Posted by tazd

when i flick my indicator the trailer symbol flashes aswell???? any ideas? or same as above

if you have indicators fitted to you bullbar than this will do it.....the extra load on the circuit makes it think there is a trailer fitted

lower wattage bulbs fixes the problem from memory

I believe it's supposed to flash once when the indicators are first used, if it continues to flash then the load on the indicator circuit is too high and the indicator relay thinks the trailer is connected. I had this in mine when I had a 20W indicator globe in the bull bar instead of 5W.

Sorted.

Glad we could be of assistance.



Cheers
Simon