There is a Firestone kit, ask a dealer. I looked into this a yr or two ago.
But Polyairs are the go. I've never had any trouble in 10+ yrs I've had them. Very versatile, easy to adjust. They'd be my suggestion.
Regards
Max P
I managed to pick them up from British offroad in Qld some years ago when they were called Landrover Land. They bought several rolled Army perenties and one of them was a Norforce RFSV. The outer coil is the standard perentie one AYG7167 (19.3mm coil thickness and 410mm long) and the inner coil is RRC3266. There is a special retainer that fits into the hole in the chassis spring bracket to locate this spring (RRC3352). I know that WB Statesman V8 front springs are the same as these inners.
There is a Firestone kit, ask a dealer. I looked into this a yr or two ago.
But Polyairs are the go. I've never had any trouble in 10+ yrs I've had them. Very versatile, easy to adjust. They'd be my suggestion.
Regards
Max P
well i was real happy with the polyairs that were fitted to my defender until the other day i discovered one had been holed
i think i brought the defender in 05 and up until the other day i had no problems, i reckon the previous owner install had then install for a number of years, a rough gues would be 8 years
i have standard 110 springs with polyairs fitted, i have been happy with this combination. i toured the simpson desert fully loaded and the rig sat level and rode well, i did have to let a bit of air out when i was in the sand and wombat holes for comfort reasons more than anything. i also tow our caravan a few time a year with a reasonably high tow ball weight
i now have to source some new air bag, the U.S. is loking good, my only concern is warranty
![]()
Timbren, Hellwig Helper Springs, Bilstein Shocks, Firestone, Air Spring Kits, Mile Marker Winch
And there's a few pretty long discussions of air bags here
http://www.aulro.com/afvb/technical-...firestone.html
I have had polyair and firestone for disco I side by side for comparison, and can't see anything that would make one better or more robust than the other.
What is the inside diameter of 110 rear coils? I have some polyairs for 80 series landcruiser and wondering if they might suit (approx 5-1/2" 140mm inside coil and about 9-1/2" 240mm tall (not including blocks)).
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks